Medisana BBS Instruction Manual page 20

GB
1 Safety Instructions
Power supply
• Before connecting the spa bath mat to the power supply, please
check that it is switched off and that the mains voltage of your
power supply corresponds to the voltage listed on the rating plate.
• Always use a socket that is accessible when connecting the
appliance.
• The appliance should be supplied through a residual current device
(RCD) with a rated tripping current not exceeding 30 mA.
• Keep mains cable and power unit away from heat, hot surfaces,
humidity and liquids. Never touch the mains plug when your
hands are wet or when you are standing in water.
• If the connection cable on this appliance is damaged, it must be
replaced by the manufacturer, its customer service or by similarly
qualified personnel to avoid any risk of danger.
• The parts of the device conducting electrical voltage must be
securely assembled to ensure they are unable to fall in the bath
and kept out of reach of anyone in the bath.
• If the device falls into water, do not try to pick it up. Instead pull
the plug out immediately.
• When you have finished using the spa bath mat, always pull the
plug out of the socket. Never disconnect the device from the mains
by pulling on the power supply cable.
• Do not leave the equipment unattended whilst it is connected to
the mains.
For special people
• Do not use this equipment to support medical treatment or as
a replacement for this. Chronic diseases and symptoms may
worsen.
12
Only use the spa bath matindoors!
Do not use the power unit and the power cord
above any type of water-filled container!