Get Started
DECT indePendant
Your private Emergency Call
indePendant overview
Status LED
Loud Speaker
left Side Key
Ring LED
Micro USB
indePendant is your daily assistant with central Call
Button. If you need help, press Call Button and you will be
connected with neighbours or friends. Fall Detection or Smoke
Alarm automatically trigger Help Call.
All activities are conducted by the language assistant.
Phone book (10 entries) with list of names is read.
SET-into-OPERATION
Charge Device
step 1:
1. Place Charging Disc on a flat, non-slip surface
2. Connect the Charging Disc mains via supplied USB cable
3. Place Device for approx. 30 min on Charging Disc
Note: Device will get a little warm; this is normal
Microphone
Call Button
right Side Key
1
2
Register Device to Base Station
step 2:
1. Place Device close to DECT base station
2. Activate Registration mode of the base station
3. Press Call Button of Device to start the Registration
4. Pay attention to announcements of Voice Assistant
check telephone connection
step 3:
1. Call Device with your mobile phone
2. If Device rings, answer the call
Note: The calling number is stored as the tenth
Family&Friends number as well as the emergency number
for help, fall detection and smoke alarm calls.
Change or supplement this number with the PC APP.
Device is ready to use
Congratulations
now you can
-
receive phone calls
-
call phone number (see Family & Friends)
-
execute a Help Call
following features are enabled:
-
Fall Detection with automatic help call
-
Smoke alarm call
_____________________________________
You can configure via PC APP:
-
all contacts for emergency (help, fall, smoke alarm)
-
more Family & Friends contacts
-
Time and Reminder Messages
3
4
5
Need help?
Do you have a question about the DA1432 DECT indePendant and is the answer not in the manual?
Questions and answers