CONGRATULATIONS! The Cook’s Companion Open Mixer is a powerful 600 watt multifunctional 5 quart appliance. The mixer features six different speeds and a pulse function for variable mixing. The included beaters and dough hook make bread, dough, whipped cream, cookies, cakes, and much more. The included scraper aides the beaters by continuously scraping the ingredients from the sides of the bowl.
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precau;ons should be followed as follows: • Read all instruc8ons. • Do not use for anything other than intended use. • Do not leave the appliance unaEended during opera8on. • Do not place the unit on or near gas or electric cooktops to avoid damages. • Make sure the unit is turned to “0” posi8on and unplugged before moving the unit. • Place the unit on a level surface away from walls and cupboards . Do not let the cord hang over the edge of a table or counter or touch hot surfaces. • Close supervision is necessary when any appliance is used by or near children. • Keep hands, hair, clothing, and utensils away from the moving parts while in use as to avoid injury and damage to the unit. • Wait un8l moving parts stop running before removing the lid or the bowl. • Do not fill ingredients above the max line on the bowl. • Unplug unit from outlet before cleaning and clean aPer every use. • Do not use unit with an extension cord, always plug into a wall outlet. • To prevent electrical shock do not immerse cord, plugs or appliance in water or other liquid. • If the unit stops opera8ng, the motor is overheated, turn the power knob to “0” and unplug the unit and allow the unit to cool (approximately 20 minutes). Plug the unit back in and con8nue opera8on. • Do not operate any appliance with a damaged cord or plug or aPer the appliance malfunc8ons, or is dropped or damaged in any manner.
ATTACHMENT ASSEMBLY How To Assemble the Scraper & Beater Attachments Together 1. Hold the scraper aEachment with the scrapers facing upward in your hand. 2. Place the beater aEachment inside of the scraper aEachment on an angle one side at a 8me. 3. Press on the inside housing of the beater aEachment by the tab and click the tab over the beater housing. 4. Repeat with the tab on the other side of the housing. The scraper and beater should be firmly in place. (See figure below for reference) 5. To assemble the beater aEachment into the bowl, firmly press the aEachment onto the rod in the middle of the bowl. Note: The beaters can be used without adding the scraper. Do not use the scraper without ingredients inside the bowl as this will damage the silicone on the scraper.
How to Assemble the Dough Hook into Bowl The hook scraper needs to be inserted into the dough hook before use. Align the dough hook and hook scraper then turn the dough scraper clockwise to lock in place. Then assemble the dough hook and hook scraper into the bowl, firmly press the dough hook and hook scraper aEachment onto the rod in the middle of the bowl. How to Assemble the Mixing Paddles To assemble the mixing paddles, first take the beaters off the housing by pulling downward on the top part of the beater nearest the housing. Then one mixing paddle at a 8me push them into the beater housing un8l secure on the silver rods. BEFORE FIRST USE 1. Remove all packaging materials. Locate all parts before throwing the box away. 2. Clean the bowl, lid, spatula and aEachments with hot water, dishwashing liquid, and a non-abrasive sponge. 3. Wipe the inside and outside of the appliance with a clean cloth.
USING THE APPLIANCE 1. Place the bowl on the base of the unit. Insert the desired attachment onto the rod in the bowl. See page 4 for reference on assembly. 2. Make sure the power knob is at “0” before plugging in the unit for proper use.
Page 7
CLEANING Always unplug the unit before cleaning. Clean the lid, bowl, spatula and aEachments aPer each use. To clean the bowl, rod, lids, spatula and aEachments hand wash with water, non-abrasive liquids and a sponge, dry with a soP cloth. To clean the base, wipe with a dry cloth. NOTE: It is not recommended to place any of these parts in the dishwasher. If a more thorough clean is desired on the beaters or mixing paddles, they can be removed by pulling up on the beaters or mixing paddles and gear. These parts should be hand washed with water, non-abrasive liquids and a sponge, dry with a soP cloth. To reassemble the beater aEachment place the gear back into place and then place the beaters back into place and press down. See figures below. STORAGE Unplug the cord from the wall outlet. Make sure all parts are clean and dry. Use the plastic lid on the bowl to store food.
Page 8
ACCESSORY USAGE CHART PART PART PURPOSE INGREDIENTS DESCRIPTION AMOUNT The dough hook should be used when making heavy Dough Hook Dry Flour 2.2lbs doughs such as bread, cookie dough or pizza dough. The mixing paddle could be Mixing Paddles Cooked Potatoes 3lbs used for cooked potatoes.
This warranty covers the original retail purchaser or giV recipient. During the applicable warranty period within normal household use, we will repair or replace, at our discre;on, any mechanical or electrical part which proves defec;ve, or replace unit with a comparable model. Shipping and handling costs are not included for warranty replacements and are the responsibility of the customer. To obtain service under the terms of this warranty, call our customer care department at 312-526-3760 (Monday- Friday 10am-6pm CST), or send an email to customercare@alliedrich.net. Please provide the model number listed on the bo\om of this page when contac;ng us. THIS LIMITED WARRANTY COVERS UNITS PURCHASED AND USED WITHIN THE UNITED STATES AND DOES NOT COVER: • Damages from improper installa;on. • Damages in transit. • Defects other than manufacturing defects. • Damages from misuse, abuse, accident, altera;on, lack of proper care and maintenance, or incorrect current or voltage. • Damage from service by other than authorized dealer or service center. • Shipping and handling costs. • This warranty gives you special legal rights and you may also have other rights to which you are en;tled which may vary from state to state. Manufacturer does not assume responsibility for loss or damage for return shipment. We recommend that you keep your original packaging should you require repair service. Before returning product please contact our customer care department for return authoriza;on. When returning product for repair please include your full name, return address, and day;me phone number. Also include a brief descrip;on of the problem you are experiencing and a copy of your sales receipt or other proof of purchase in order to validate warranty status. MODEL CCDML3...
Need help?
Do you have a question about the CCDML3 and is the answer not in the manual?
Questions and answers