Advertisement
ROOT STYLER
FINE
Select the first setting for fine, delicate or light-coloured hair. The
LCD will indicate 100°c, the word FINE and 1 bar.
NORMAL
Select the second setting for easy-to-style hair. The LCD will
indicate 160°c, the word normal and 2 bars.
THICK
Select the third setting for THICK hair. The LCD will indicate 190°c,
the word THICK and 3 bars.
COARSE
Select the fourth setting for very thick or COARSE hair. The LCD will
indicate 220°c, the word COARSE and 6 bars.
BASIC STYLING
For best results start with clean dry hair.
1.
Set the digital temperature control to the desired temperature and
allow for the blue indicator light to stop blinking. This indicates that
the styling tool has reached the selected styling temperature.
2.
Starting at the nape of the neck, use a comb or the teeth on your
Root Control Duo to separate hair into 1" wide by ½" thick sections.
3.
Start at the root of each section and place the teeth close to the
scalp and grip the hair. Be careful not to touch the scalp with the
hot barrel.
4.
Maintaining pressure on the hair, slowly slide the tool down each
section.
5.
Continue to repeat this process working your way up the head one
section at a time.
6.
For the added lift and volume you can turn the tool around so the
teeth point up. Grip the hair at the scalp and pull up as you slide
the tool down each section.
7.
Use the tool to turn in or flip up the ends of each hair section to
achieve the desired style.
8.
After completing all sections, use the tool to comb through,
smooth, add shine and finish the style.
9.
Learning new styling techniques may take some time. Experiment
with your particular hair type and length to achieve desired results.
8
Advertisement
