Auto Return - Sylvania 6313CE Owner's Manual

8
Set end minute
Press [PLAY/ K K ] or [STOP/ L L ]
until the desired minute appears.
(Example: "50" for 8:50PM)
Then hit [F.FWD/ B B ].
9
Set the tape speed
Press [PLAY/ K K ] or [STOP/ L L ]
until the desired tape speed
appears. (Example: "SP")
10
Finish setting the program
Hit [F.FWD/ B B ] to complete setting.
•
To set another program, repeat steps 2 to 10.
•
Hit [MENU] to exit the menu.
11
Set the timer
Hit [POWER] to set automatic timer recording. The
recording indicator lights up.
•
You must turn off the unit to activate automatic
timer recording.
If power is not turned off and you continue watching
TV, "TIMER REC STANDBY" starts flashing on the
TV screen 2 minutes before the programmed start time.
•
If the erase-prevention tab is removed, the cassette
will be ejected when [POWER] is hit to off.
TIMER PROGRAM EXTENSION
To shift the time schedule of an automatic timer recording.
1)Hit [POWER].
2)Repeat step 1 on page 23.
3)Hit [RECORD] and select the desired program
using [PLAY/ K K ] or [STOP/ L L ].
4)Hit [RECORD] again.
Each additional push will shift forward the begin/end
time for recording by 10 minutes. When the recording
is already in progress, each additional push will shift
forward the end time only. If you want to cancel while
setting, hit [PAUSE/STILL F] on the remote control.
The recording time returns to the original time.
NOTE:
•
When you shift forward the time schedule during
recording, the recording speed will automatically
be set to the SLP mode.
5)Press [REW/s s ] or [F.FWD/ B B ] to exit the setting
menu. Then hit [MENU] to return to original mode.
TO CORRECT A PROGRAM
•
While setting a program; hit [REW/s s ] to go
back one step and enter the correct numbers using
[PLAY/ K K ] or [STOP/ L L ].
•
After setting a program;
1)Hit [POWER].
2)Repeat steps 1 to 2 on page 23.
3)Hit [F.FWD/B B ] (or hit [REW/s s ] to go back one
step) until the part you want to correct begins flashing,
then make the changes using [PLAY/ K K ] or
[STOP/ L L ].
– TIMER PROGRAMMING –
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
1)Hit [POWER].
P P
B 61 7/04 MON 7:30 8:50 - -
M M
- - -/- - - - - -:- - -:- - - -
2)If recording is in progress, hit [STOP/EJECT
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
3)Repeat steps 1 to 2 on page 23 and select a pro-
– TIMER PROGRAMMING –
4)Hit [T-PROG. CLEAR].
CH DATE BEGIN END
- - -/- - - - - -:- - -:- - - -
5)Hit [MENU] to return to TV mode.
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
P P
B 61 7/04 MON 7:30 8:50 SP
M M
- - -/- - - - - -:- - -:- - - -
TO CONFIRM THE TIMER SETTING
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
- - -/- - - - - -:- - -:- - - -
1)Hit [POWER] so that the Recording indicator
2)Hit [MENU].
3)Confirm "TIMER PROGRAMMING" is selected.
4)Hit [F.FWD/ B B ]. The details of programs appear
5)Hit [MENU] to return to TV mode.
With this feature, after timer recording is finished,
the beginning of the recorded program(s) can be
searched for automatically.
1
Hit [MENU].
Press [PLAY/ K K ] or [STOP/ L L ] to
point to "USER'S SET UP", then
hit [F.FWD/ B B ].
2
Press [PLAY/ K K ] or [STOP/ L L ] to
point to "AUTO RETURN", then
press [REW/s s ] or [F.FWD/ B B ]
until [ON] appears.
3
When all the timer recordings are completed, the unit
will rewind to the beginning of the recorded program(s).
NOTE:
•
4
Hit [PLAY/ K K ].
TO CANCEL THE AUTO RETURN MODE
Repeat steps 1 to 2 and select [OFF] using
[REW/s s ] or [F.FWD/ B B ].
Even if there is a power failure of any kind, the
unit will retain its memory for this feature.
- 24 -
4)Hit [POWER] to set automatic timer recording.
TO CANCEL AN AUTOMATIC TIMER
RECORDING
the unit.
gram you want to cancel.
light goes off.
on the TV screen.
NOTES:
•
The display will not be turned on automatically
at the time the programmed recording begins.
•
If the tape runs out before the end time, the unit
will switch to the stop mode immediately and
the tape will be ejected.

AUTO RETURN

Select "USER'S SET UP"
Set "AUTO RETURN" to [ON]
Auto Return will begin
If you hit [POWER] while tape is rewinding, the
Auto Return will stop.
Watch the recorded program
] on
P P N N
– M E N U –
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
B USER'S SET UP
V-CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION [OFF]
ZERO RETURN
TIME SEARCH
– USER'S SET UP –
RENTAL [OFF]
REPEAT PLAY [OFF]
B AUTO RETURN [ON]
EN