Sylvania 3819LC Owner's Manual page 9

- REAR VIEW - [Fig.3]
7 Press to rapidly advance the tape, or
F.FWD button–
to view the picture rapidly in forward during
playback mode. (Forward Search)
B button–
When setting program (for example: setting clock or
timer program), press to determine your selection
and proceed to the next step you want to input.
Press to determine setting modes from on screen
menu.
Press to select a mode from a particular menu.
(for example: LANGUAGE or USER'S SET UP)
8
REC button– Press for manual recording.
Activates One Touch Recording.
OTR button–
(only on the TV/VCR)
9
RECORD indicator–
Lights up in the Stand-by mode for Timer Recording.
10
Remote Sensor Window–
signals from the remote control.
11 CHANNEL / buttons–
sired channels for viewing or recording.
TRACKING function–
'noise' (lines or dots on screen) during playback
mode. (See page 19.)
VOLUME X / Y buttons–
12
13
POWER button– Press to turn TV/VCR on and off.
Press to activate timer recording.
14
Cassette compartment
15 Press to select desired channels
Number buttons–
for viewing or recording. To select channels from 1
to 9, first press the 0 button and then 1 to 9.
When selecting cable channels which
+100 button–
are higher than 99, press this button first, then press
the last two digits. (To select channel 125, first press
the "+100" button then press "2" and "5").
Flashes during recording.
Receives the infrared
Press to select the de-
Press to minimize video
Adjust the volume level.
16 Press to display the main menu on
MENU button–
the TV screen.
17 DISPLAY button–
channel number and current time on the TV screen.
(See page 16)
18 Press to choose the desired
SPEED button–
recording speed:SP/LP/SLP.
19
T-PROG. CLEAR button–
timer program (See page 25).
COUNTER RESET button–
0:00:00.
20 Sets the game mode and external
GAME button–
input mode at the same time. (See page 17.)
21 TIME SEARCH button–
Search mode.
22
PAUSE/STILL button–
tape during the recording or to view a still picture
during playback.
23 MUTE button– Mutes the sound. Press it again to
resume sound.
24
CHANNEL RETURN button–
previously viewed channel. For example, pressing
this button once will change channel display from 3
(present channel) to 10 (previously viewed channel),
and pressing it a second time will return from 10 to
3.
25
WAKE UP/SLEEP button–
Sleep Timer. (See page 26.)
26 Connect to a standard AC outlet.
Power cord–
27
ANT. terminal– Connect to an antenna or CATV.
- 9 -
T
Display the counter or the current
Press to cancel a setting of
Press to reset counter to
Press to activate Time
Press to temporarily stop the
Press to go back to the
Sets the Wake up or
EN
8E21