Advertisement
Available languages
Available languages
Kaiser
RB 5000 DL
Copy Lighting Unit
5556
max.
max.
45 mm
48 mm
(1.9 in.)
Changing lamps and starters
Pull out the mains plug before changing a fluorescent lamp (3) or a starter (4).
Open the lamp holder (1) by pulling the retainer (2) off the fluorescent lamp, and then folding back
the lamp holder bracket. Hold down the red release button (5), and take the fluorescent lamp (3) up-
ward out of the fitting (6). Put the new fluorescent lamp into the lamp holder (1) first. Then push the
contact pins on the fluorescent lamp into the fitting from above, until they audibly click home. Then
close the lamp holder.
Starters (4) are taken out of their sockets by turning them anti-clockwise. Fit new startes by turning
them in the opposite direction.
Important instructions
Please note that it takes approx. 3 minutes before fluorescent lamps have correct colour
temperature.
Avoid turning the lamps on and off within very short perids of time as this will reduce the
service life of the lamps.
Do not cover the ventilation holes of the light troughs during operation.
Spare lamp:
36 W, 5400 K, colour reproduction index: CRI = 90-100,
(Art.-No. 5567)
average life: 8000 h (code no. 5567)
Starter:
Single, AC 220-240 V, 36 W, e.g. Osram St 111, 4-80 W or Philips S 10, 4-65 W
Right reserved to make technical modifications.
ON/OFF
230-240 V, 50 Hz
(or export version
120 V, 60 Hz)
KAISER FOTOTECHNIK GMBH & CO. KG
Im Krötenteich 2 · 74722 Buchen · Germany
Telefon +49(0)6281-4070 · Fax +49(0)6281-40755
www.kaiser-fototechnik.de · info@kaiser-fototechnik.de
1
2
3
1
2
4
5
6
Advertisement
