Levven Q Quick Start Manual

Levven Q
Quick Start Guide
Connecting Levven Q
1. Place Levven Q in a central location, ideally near your Wi-Fi
router or network switch.
2. For optimum wireless reception, mount your Q vertically,
high on a shelf or wall.
3. Connect the supplied CAT-5 network cable between a LAN
port on your home network router and Q's network port.
4. Connect the DC power wall adapter into Q's power port and
plug the wall adapter into an AC outlet.
5. Q's LED will be lit solid green when ready.
Levven Q connections and controls
Levven Q connects to your wired home network via its Ethernet LAN port.
Network
(LAN) port
DC power
input
Add Levven Q to the group
Levven Q needs to be added to the controller group in the
home. To group controllers yourself, refer to the guide at
levven.com/support.
1. Locate the accessible Levven controller
behind the Levven wall plate, which will
be located beside the electrical panel. If
your electrical panel is outdoors, then the
Levven wall plate will be located in the
garage.
2. Using a pen or paper clip, click the
controller's 'pair' button through the
larger hole in the center of the wall plate.
The controller LED will blink green, visible
through the small hole in the plate.
3. Click the V-shaped 'pair' button on Q. The LEDs on the
controller and Q will blink red and green.
4. Click the controller's 'pair' button to confirm the addition to
the group. The LEDs on the controller and Q will flash green
to show that the Levven Q has been successfully added.
5. To begin operation, follow the app's first-run guides on the
Devices, Zones, and Settings screens.
Features guide
View the Levven Q
features video at
levven.com/support.
Scan this QR code to
open this page in your
mobile device.
LED status
indicator
Pair button
Reset

Download the app

The Levven Controls app is available on the Android Play
Store and the Apple App Store. Search each store for "Levven
Controls".

Follow the prompts

The setup prompts that appear when
you open the app for the first time
will guide you through the process
to connect Levven Q on your mobile
device.
The app will detect your Levven Q on
the local network. Tap the Levven Q
to connect, then enter the 10-digit PIN
located on the label on back of the
Levven Q. Register Levven Q to your
home address.
Create a cloud
account or operate
locally
Levven Q give users the choice to connect via the
home's local network, or to access to the home's
Levven Controls from anywhere in the world via the
cloud.
Set up a cloud account from the Levven Controls app
to receive feature updates as they are released, and to
use voice control with Amazon Alexa or Google Home.