28
How to gain access to the components
A. REMOVING THE CABINET (see Fig. 5)
Caution! Very high voltages are generated in this apparatus, so that
when work is carried out on the inside of the apparatus great care must be
taken.
The cabinet consists of a number of separate plates which may be
individually detached.
Rear plate
1. Loosen and remove the six screws "A".
2. Remove the rear plate.
Top plate and side plates
I. Loosen and remove the screws "B".
2. Push the plate forward and lift it out of the frame.
BA
B
A
B
A
PEM 743
Fig. S. Removing the panels
Bottom plate
1. Loosen and remove the screws with which the two strips with rubber
studs are fastened.
2. Remove the bottom plate.