Advertisement
Quick Links
A600 Shelving System
This package includes:
Shelf Supports
(part # P642)
Floor Mount Brackets
(part # H162A)
A
#14 x 2" Screws
(part # H672)
(actual size shown)
Tools required for assembly:
Assembly Instructions
x6
x2
B
x24
#14 x 1.25" Screws
(part # H671)
(actual size shown)
Cross Bars
(part # H175)
Wall Anchor Brackets
(part # H346)
x16
.25" Flat Washers
(part # H210)
(actual size shown)
#3 Phillips Head Screwdriver
or
Drill with #3 Phillips Head Bit
x12
x2
x40
ADP-A600 REV. 07/30
Advertisement
Summary of Contents for Mytee A600
- Page 1 A600 Shelving System Assembly Instructions This package includes: Shelf Supports Cross Bars (part # P642) (part # H175) Floor Mount Brackets Wall Anchor Brackets (part # H162A) (part # H346) #14 x 2" Screws #14 x 1.25" Screws .25" Flat Washers...
- Page 2 Assembling the A600 Shelving System 1. Insert four (4) shelving tubes into the four lower slots on 2. Screw each shelving tube into place using one of the 2” A screws with a .25” washer. Screws should line up one of the side panels.