SWIT S-3822A User Manual

Lithium Battery Charger
S-3822A/S
Ver:B
Congratulations on your purchase of this product. Please read this user manual carefully.
Warning
Never expose the battery charger to rain or moisture.
◆
Never attempt to open the battery charger, please contact the
◆
local agent if have problems.
Never use metal or other conductors to touch the inside of the
◆
battery charger.
Never short-circuit the battery charger terminals.
◆
Please make sure the voltage range is fit for the battery charger.
◆
Please use the power adapter provided by the manufacturer in
◆
order to avoid damage.
Never use the battery charger if it is already damaged.
◆

Features

1. 2-channel independent charging and controlling system, capable
of 3A charging two batteries simultaneously.
2. One channel AC-DC adaptor output via 4-pin XLR, maximum
power output reaches 90W.
3. LED lights indicate the real-time working status.

Product appearance

①Charging channel (V-mount/Gold mount)
②Battery release button
③Charging LED indicator
④Adapting LED indicator

Charging

Two charging channels are independent channels and can charge
simultaneously.
1. Connect with power lead, turn on the power switch
2. Mount battery(ies) onto the charging channel(s), and it starts to
charge the mounted battery(ies) simultaneously. The LED light(s)
of the related charging channel(s) will indicate like these：
Red: the battery capacity is below 100%
Green: fully charged
Red flash: the charging may have problem
3. When full charged, press battery release button and take out
the battery(ies).
USER MANUAL
S W I T E l e c t r o n i c s C o. , LT D.
⑤ Power switch
⑥ Power input socket
⑦ 4-PIN XLR DC output socket
Caution
Only limited to charge specified battery(ies), it may cause danger if
◆
charge other battery(ies) due to incompatibility problem.
Only work in the temperature between 0℃-45℃
◆
Keep the terminals clean and ensure the reliable connection.
◆
It is normal phenomenon that the battery charger may become warm in use.
◆
Please unplug the power lead if the battery charger is not used for a
◆
long time.
Do not cover the cooling vent.
◆
Please do not put the battery charger in unstable place, it may fall and
◆
cause serious damage.
Store the battery charger in cool, dry and clean place.
◆

Specifications

Input
Power
Charging Output

Adapting Output

Working Temperature
Working Humidity
Dimension
Weight

Compatible Batteries

S-3822A: SWIT Gold mount battery (Including: S-8083A, 8082A,
8192A, 8152A, 8113A, 8183A, 8110A, 8180A, D-8111A, 8150A, 8161A,
PB-S220A, S-98A. Capacity: 80Wh-240Wh, Vmax: 16.9V, Ichr: 3A-6A)
S-3822S: SWIT V-mount battery (Including: S-8083S, 8082S, 8192S,
8152S, 8113S, 8183S, 8110S, 8180S, D-8111S, 8150S, 8161A, 8320S,
8340S, 8360S, PB-S220S, S-98S. Capacity: 80Wh-240Wh, Vmax: 16.9V,
Ichr: 3A-6A)
SONY V-mount battery (Including: BP-GL95, GL65, L60S,
IL75, L40A, L90A, L60A）
Adapting output
The S-3822A/S offers one channel 4-pin XLR adapting output.
1. Connect with power lead, turn on the power switch, and the
adapting LED indicator will light on.
2. Connect the adapting output to power consuming equipment;
Note:
1. When adapting output, please make sure the voltage and power of
the power consuming equipment meet the requirement (15V, 6A).
2. S-3822A/S does not support charging and adapting output at the
same time. If channel(s) are inserted with battery(ies) during
charging, there will be no DC output. When no battery is mounted,
there will be adapting output.
Tel:+86-25-85805753
Fax:+86-25-85805296
http://www.swit.cc
E-mail: contact@swit.cc
100～240VA, 50/60Hz
138W(Max)
DC 16.8V, 3A(Max )×2
DC 15V, 6A(Max)
0℃～+45℃
10%～90%
228mm×140mm×86mm(S-3822A)
228mm×140mm×102mm(S-3822S)
Appx 1.0kg