i Luv Wireless EZ Phone 4G GPS ILW01 User Manual

Advertisement

Quick Links

EZ Phone 4G GPS
(Version 1.0)
User Manual
ILW01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EZ Phone 4G GPS ILW01 and is the answer not in the manual?

Questions and answers

Summary of Contents for i Luv Wireless EZ Phone 4G GPS ILW01

  • Page 1 EZ Phone 4G GPS (Version 1.0) User Manual ILW01...
  • Page 2 1.1 Overview 1.2 Accessories User Manual 1.3 Features ◎ GPS+LBS+WIFI positioning ◎ Listen-in ◎ HD display ◎ SOS call and family calls...
  • Page 3: Specifications

    1.4 Specifications Location Accuracy: <10 meters Working voltage/current : 3.8VDC/20mA Battery: 1500mAh/3.8 lithium-polymer battery Dimensions: 101.0(L)*62.0(W)*11.0(H)mm Weight: 81g Operating Temperature: -20℃—+60℃ 2. Quick start 2.1 SIM card 2.2 Insert SIM card Remove the back cover (Make sure the device is turned off). If your device is turned on remove the back cover and use the reset pinhole above the SIM card slot.
  • Page 4: Device Operation

    NOTE: Please turn off the device before you insert or take out your SIM card. If your device is turned on remove the back cover and use the reset pinhole above the SIM card slot. SIM card with GSM network, GPRS (>30M monthly) and caller ID function is recommended. 2.3 Insert ID card 3.
  • Page 5 Reset Pinhole - The power button is disabled. Insert a pin, toothpick, or a paperclip and you will feel one Power button click and the phone will shut down. Hold the SOS key to restart. NOTE: If the device can’t be turned on, please charge it. 3.2 Charging Connect the device with the original charger.
  • Page 6: Check Location

    5. Functions 5.1 Two-way talk (Phone Calls) Press and hold for 3 seconds to dial family number 1 Press and hold for 3 seconds dial family number 2 Press and hold for 3 seconds dial family number 3 NOTE: 1. Press button 1 or tap the green circle on the screen to answer and press SOS or tap the red circle on the screen to hang up.
  • Page 7: Screen Auto Lock

    You Can Set Geo-Fence areas on Secure Tracker. When the phone enters or leaves a geo-fence a notification will be sent. 5.6 Screen Auto Lock The screen will automatically lock in five seconds. To change this setting send a command via text message from one of the programmed SOS numbers to the phone.
  • Page 8 Move back to the GSM service No Service covered area. Weak signal Try again in a strong signal area Voltage is out of charging range of Change to the proper voltage charger. Device fails to charge Use the charger included with your Use non-standard charger device Poor contact...

Table of Contents