Installation Instructions; Required Tools - Danby Parcel Guard DPG37U Owner's Manual

INSTALLATION INSTRUCTIONS

FEATURES
1. Camera and wifi signal receiver
2. Signal fl ag
3. Upper door handle
4. Upper door
5. Lower door
6. Door lock
ACCESSORIES
A. Concrete bolts with expanding sleeves (x2)
B. Wood screws (x2)
C. Washers (x2)
D. Power adapter

REQUIRED TOOLS

The following tools are required to complete the
installation:
• Safety goggles
• Pencil or pen
• Wrench
• Power drill with 1/4" concrete bit
1
6
LOCATION
The installation location should include the
following:
• A level location that is strong enough to support
the Parcel Guard when it includes ballast and
packages.
• Access to a 120V power outlet. Make sure that
the power cord will not cross walking paths or
high traffi c areas.
• Access to a strong wireless signal. Use your cell
phone to check the wireless signal in the chosen
location. Your phone should get at least three
bars of signal.
• Unobstructed camera view. Ensure the fi eld
of view in front of the Parcel Guard is not
obstructed by foliage or structures so that the
camera can capture clear video.
3
2
3
4
5