AmLed Technologies SG series Installation Instructions

Advertisement

PLEASE READ ENTIRE DOCUMENT BEFORE INSTALLATION
1035 N Hilltop Dr Itasca, Illinois 60143
® ®
Installation INSTRUCTIONS
SG series Smart Grow Light
SAFTEY INSTRUCTIONS AND WARININGS
WARNING:
Risk of re or electric shock, LED Luminaire installation requires
knowledge of luminaires electrical systems. if not quali ed, do not
attempt installation.
Be certain electrical power is OFF before and during installation and
maintenance. LED Luminaire must be connect to wiring system
with an equipment-grounding conductor. Make sure the supply
voltage is same as the rated luminaire voltage
Only those open holes indicated in the photograph and/or drawing
may be made or altered as a result of this kit installation. Do not
leave any other open holes in an enclosure of wiring or electrical
components.
To prevent wiring damage or abrasion, do not expose wiring to edge
of sheet metal or sharp objects.
No user serviceable parts inside of LED Luminaire
1-844-787-5858
Fax: 1-708-272-7221
www.amledtechnologies.com
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SG series and is the answer not in the manual?

Questions and answers

Summary of Contents for AmLed Technologies SG series

  • Page 1: Installation Instructions

    ® ® INSTALLATION INSTRUCTIONS PLEASE READ ENTIRE DOCUMENT BEFORE INSTALLATION SG series Smart Grow Light SAFTEY INSTRUCTIONS AND WARININGS WARNING: Risk of re or electric shock, LED Luminaire installation requires knowledge of luminaires electrical systems. if not quali ed, do not attempt installation.
  • Page 2 LED Smart Grow Installation Instruction Multi Units Connection With The Smart Controller Daisy-chain System A. Wire connection controlling AC IN AC OUT AC IN AC OUT COM IN COM OUT COM IN COM OUT Remote Control Unit Smart controller connection: One controller connected with a grow light can control as much as 250 grow lights in a daisy-chian system configuration as shown above.
  • Page 3 LED Smart Grow Installation Instruction Contd... Installation PLEASE READ ENTIRE DOCUMENT BEFORE INSTALLATION WARNING: Improper installation could result in product damage and void all warranties. WARNING: Disconnect all power before servicing. Risk of electrical shock or fire. 1) WARNING – RISK OF FIRE OR ELECTRIC SHOCK. INSTALLATION OF THIS RETROFIT KIT REQUIRES A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE LUMINAIRE’S ELECTRICAL SYSTEM AND THE HAZARD INVOLVED.

This manual is also suitable for:

Sg150xSg300x

Table of Contents