Advertisement
Quick Links
INSTALLATION INSTRUCTIONS
Product
7160-1135
GETAC ZX70 CRADLE
This instruction sheet is for the Getac ZX70 cradle only. For instructions on features, set-
up, and operation of the computer, please refer to the manual provided by Getac with the
computer.
This cradle is designed to be used with a variety of Gamber-Johnson mounting systems.
Installation instructions for other Gamber-Johnson products are provided with each
individual product.
This instruction sheet is for the following products:
Item No. 7160-1135-00
7160-1135-01
Product Mounting Disclaimer
Product Mounting Disclaimer
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
Gamber-Johnson is not liable under any theory of contract or tort law for any loss, damage, personal injury, special, incidental or consequential damages for personal injury or other damage
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
of any nature arising directly or indirectly as a result of the improper installation or use of its products in vehicle or any other application. In order to safely install and use Gamber-Johnson
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
products full consideration of vehicle occupants, vehicle systems (i.e., the location of fuel lines, brakes lines, electrical, drive train or other systems), air-bags and other safety equipment is
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
required. Gamber-Johnson specifically disclaims any responsibility for the improper use or installation of its products not consistent with the original vehicle manufactures specifications
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
and recommendations, Gamber-Johnson product instruction sheets, or workmanship standards as endorsed through the Gamber-Johnson Certified Installer Program.
If you need assistance or have questions, call Gamber-Johnson at 1-800-456-6868
Revision
A
Printing Spec: PS-004
Form
INST-865
1 / 5
Advertisement
Summary of Contents for Gamber Johnson Getac ZX70
- Page 1 INST-865 GETAC ZX70 CRADLE Printing Spec: PS-004 This instruction sheet is for the Getac ZX70 cradle only. For instructions on features, set- up, and operation of the computer, please refer to the manual provided by Getac with the computer. This cradle is designed to be used with a variety of Gamber-Johnson mounting systems.
-
Page 2: Pre-Installation Recommendations
PRE-INSTALLATION RECOMMENDATIONS Conduct a "Bench Test" (7160-1135-01) Gamber-Johnson strongly advises a "bench test" be conducted to verify all electronic and software issues are resolved prior to installation: Make sure the computer is operational by itself. Insert computer into the docking station and verify that the computer is operating in the dock. -
Page 3: Docking Connector
GETAC ZX70 CRADLE FEATURE IDENTIFICATION LATCH DOCKING CONNECTOR LOCK BASE 4X 1/4-20 UNC THREADED INSERTS VESA 75mm PATTERN POWER CABLE STRAIN RELIEF... - Page 4 DOCKING AND UNDOCKING THE TABLET Figure 1 Figure 2 DOCKING THE TABLET Insert the bottom of the tablet into the chargin cradle (fig.2) Rotate the top of the tablet back into the cradle until the latch springs down in front of the tablet to hold it in place (fig.3) Optional - The key lock can now be used to secure the tablet in the cradle.
- Page 5 REGULATORY CERTIFICATION INFORMATION Regulatory Model #: 7160-1135 GJ Model #'s & Description: 7160-1135-00 Cradle-Getac-ZX70 (Non-Powered) 7160-1135-01 Cradle-Getac-ZX70 (Power Only) Certifications: • EN 50581:2012 • EN 60850-1:2006/A2:2013 Gamber-Johnson LLC, 3001 Borham Ave., Stevens Point, WI, 54481, USA, 715-344-3482 5 / 5...