SJE Rhombus C-Level Manual
Hide thumbs
Also See for C-Level:
- Installation and operation manual (12 pages) ,
- Installation instructions (2 pages)
Advertisement
SJE-Rhombus
®
The SJE-Rhombus
C-Level
adjustable C-Level
™
simulation signal. The output of the C-Level
the simulators adjustment knob. The C-Level
device.
SPECIFICATIONS
SUPPLY VOLTAGE
OUTPUT SIGNAL
ACCURACY
OPERATING TEMPERATURE
ENCLOSURE MATERIAL
WEIGHT
CABLE
FUSE
DIMENSIONS
™
Sensor Simulator is an easy-to-use, hand-held test instrument designed to generate an
™
Sensor Simulator can be used on almost any SJE-Rhombus
3.39"
LIQUID LEVEL
RED - POSITIVE
BLACK - NEGATIVE
CLEAR - SIGNAL
2"
C-Level
®
™
™
Sensor Simulator is adjusted across the full range by turning
7-13 VDC ±5%
FREQUENCY (1 kHz to 3 kHz)
± 5%
+32º TO +122º F
ABS PLASTIC
5 oz.
SPEC:
LENGTH:
TERMINATION: FERRULE
500mA 5x20MM FAST BLOW
0.90"
1.54"
Simulator
20 AWG, 3 COND.
36 IN
PO Box 1708, Detroit Lakes, MN 56502
1-888-DIAL-SJE • 1-218-847-1317
1-218-847-4617 Fax
email: customer.service@sjerhombus.com
www.sjerhombus.com
®
™
C-Level
enabled
36" Leads
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for SJE Rhombus C-Level
Summary of Contents for SJE Rhombus C-Level
- Page 1 The output of the C-Level ™ Sensor Simulator is adjusted across the full range by turning ™ ® ™ the simulators adjustment knob. The C-Level Sensor Simulator can be used on almost any SJE-Rhombus C-Level enabled device. SPECIFICATIONS SUPPLY VOLTAGE 7-13 VDC ±5%...
- Page 2 2. When connected correctly and power applied, the green loop power indicator turns on. TEST THE SYSTEM 1. Verify the device being tested shows a minimum value for the input when the C-Level ™ Sensor Simulator adjustment knob is turned fully counter-clockwise, and a maximum value when the adjustment know is turned fully clockwise.
Need help?
Do you have a question about the C-Level and is the answer not in the manual?
Questions and answers