Download Print this page

Albrecht digi-TV 300 Quick Start

Available languages

You do not want to read the whole manual?

There is a very convenient function to start immediately with

the necessary settings. The same procedure can also be

performed if the TV set shall be used at a new location:

Reset and Installation Wizard Start (see also page 11)

• Switch the TV set on

• Press Menu / OK at least 5 seconds continuously

• Highlight OK with the cursor and confirm with OK

The unit performs a factory reset to the default settings and

starts ready with German language + regional settings

• Use the cursor buttons to select the automatic

channel search

• Confirm every selection with OK

• Wait some minutes until all channels are stored-

The TV set starts with the first registered channel.

digi-TV 300 Quick Start

Table of Contents

Need help?

Do you have a question about the digi-TV 300 and is the answer not in the manual?

Page 1 300 Quick Start You do not want to read the whole manual? There is a very convenient function to start immediately with the necessary settings. The same procedure can also be performed if the TV set shall be used at a new location: Reset and Installation Wizard Start (see also page 11) •...
Page 2 300 Schnellstart Sie wollen sich nicht die Mühe machen, die ganze Anleitung zu lesen? Eine bequeme Schnellstart und Reset Funktion startet den Installations-Assistenten mit den deutschen Einstellungen. Genauso gehen Sie vor, wenn Sie nach einer Standortänderung erneut Sender suchen lassen (lesen Sie auch auf Seite 11 nach).