Download Print this page

Panasonic EY37C4 Service Manual

Led floodlight
Hide thumbs Also See for EY37C4:

Advertisement

Quick Links

TABLE OF CONTENTS

1 Warning -------------------------------------------------------------- 2
2 Specifications ----------------------------------------------------- 2
3 Troubleshooting Guide ----------------------------------------- 3
Model No.
Europe
Oceania
PAGE
© Panasonic Corporation 2019. All rights reserved.
Unauthorized copying and distribution is a violation
of law.
ORDER NO. WSHES1909E01CE
LED FLOODLIGHT
EY37C4

Advertisement

loading

Related Manuals for Panasonic EY37C4

Summary of Contents for Panasonic EY37C4

  • Page 1: Table Of Contents

    2 Specifications ----------------------------------------------------- 2 3 Troubleshooting Guide ----------------------------------------- 3 4 Disassembly and Assembly Instructions ---------------- 4 5 Exploded View and Replacement Parts List ------------ 7 © Panasonic Corporation 2019. All rights reserved. Unauthorized copying and distribution is a violation of law.
  • Page 2: Warning

    1 Warning Caution: • Pb free solder has a higher melting point that standard solder; Typicall the melting point is 50 - 70°F (30 - 40°C) higher. Please use a soldering iron with temperature control and adjust it to 750 ± 20°F (400 ± 10°C). In case of using high temperature soldering iron, please be careful not to heat too long.
  • Page 3: Troubleshooting Guide

    3 Troubleshooting Guide 3.1. Troubleshooting Guide * Check the battery voltage before the inspection. TROUBLE REMEDY CHECK Replace the hinge The handle does not Confirm that the setting part of the hinge Assembly. remain at the set angle. assembly is not out of stock or worn. CHECK REMEDY TROUBLE...
  • Page 4: Disassembly And Assembly Instructions

    4 Disassembly and Assembly Instructions *To assemble the tool, start with 15 and proceed to 1. 4. Remove 4-pin connector from the main module. 1. Remove 4 tapping screws. 2. Remove 2 tapping screws from main module. 5. Remove the heat resistant tape from the main module. 3.
  • Page 5 9. Remove Speaker assembly. Pay attention not to snap 4P lead wire. 10. Rotate joint parts to remove 4 screws. 13. Take out the lens and ring rubber. 14. Remove the screw. 11. Rotate the LED unit to remove the joint. 15.
  • Page 7: Exploded View And Replacement Parts List

    5 Exploded View and Replacement Parts List 5.1. PARTS LOCATION 9070001 2019 Production marking 7 digits 9 07 0001 Serial No. Month Year (Last 1 digit) 2019 Year...
  • Page 8 5.2. REPLACEMENT PARTS LIST Model No.EY37C4 Ref. No. Part No. Part Name & Description Q'ty Remarks WEY37C4K3088 BASE UNIT WEY37C4L3127 USB RUBBER COVER WEY37C4K1448 CASE ASSEMBLY WEY37C4L3487 LENS WEY37C4L0217 RING RUBBER WEY37C4L3177 COVER BASE WEY37C4K0877 HINGE COVER (φ25) WEY37C4L1337 HINGE ASSEMBLY...