Hdmi Audio - Sylvania titanium 6626LCT Owner's Manual

C New Password
4
Display the "New Password" screen.
• Using [ K / L ], select "New Password".
V-Chip V-Chip
MPAA Rating
TV Rating
New Password
• Press [ENTER].
5
Change the Password.
• Use Channel number buttons on the remote
control and enter the NEW 4-digit Password.
• Enter Password again in "Confirm Password"
box.
V-Chip
V-Chip
Enter password.
Confirm password.
6
To exit the setup, press [SETUP].
NOTES:
• Make sure to enter the exact same new password in the
"Confirm Password" space as one in the space. If they are
different, the space is cleared for reentering.
• Your password will be erased and return to the default
(0000) when a power failure occurs or when you turn off the
power using a wall switch. If you forget the password,
unplug the power cord for 10 seconds to restore the pass-
word to 0000.
30
EN
Back
PIN Code Back

HDMI AUDIO

Set the method of sound input for HDMI jack.
- 0
SETUP SETUP
BACK
1
Display the setup screen.
• Press [SETUP].
The following setup screen is displayed.
2
Select "DETAIL" and press [ENTER] to confirm.
• Using [ K / L ], select "HDMI Audio" and press
[ENTER] to confirm.
Detail Detail
Closed Caption
V–chip
HDMI Audio
3
Switch the HDMI Audio.
• Using [ K / L ], select the desired HDMI Audio,
then press [ENTER].
Detail Detail
Closed Caption
V–chip
HDMI Audio
• Select "Auto" if you connected to both digital
device with HDMI jack and analog device for
audio sources. Digital audio input signal has
prior in this setting.
• Select "Digital" if you connected to digital
device with HDMI jack for digital audio input
signal.
• Select "Analog" if you connected to analog
device with analog jacks for analog audio input
signal.
4
To exit the setup, press [SETUP].
STILL
SCREEN
MODE
ENTER ENTER
INFO
Auto
Auto
Digital
Analog