Advertisement
Quick Links
Installation Instructions
Original Instructions
Feedback Battery Box
Catalog Number 2198-KTBT
Topic
Install Battery
Install or Replace Battery Box
Additional Resources
Use these installation instructions to install or replace a battery box, install a battery, and prepare
a feedback cable for a battery box installation. The battery box requires a 3.6V, ER14252, or
equivalent, 1/2AA size battery that you supply.
Install Battery
The battery box requires a 3.6V, ER14252, or equivalent, 1/2AA size battery.
To install the battery, do the following.
1. To open the battery box, release the four snap-fit tabs.
2. Insert the battery as shown.
3. Replace the cover and check that all four snap-fit tabs are engaged.
IMPORTANT
Snap-fit Tabs
(X4)
To avoid the loss of position data, be sure to replace the battery within 10 minutes.
Page
1
2
4
-
+
Advertisement
Summary of Contents for Rockwell Automation Allen-Bradley 2198-KTBT
- Page 1 Installation Instructions Original Instructions Feedback Battery Box Catalog Number 2198-KTBT Topic Page Install Battery Install or Replace Battery Box Additional Resources Use these installation instructions to install or replace a battery box, install a battery, and prepare a feedback cable for a battery box installation. The battery box requires a 3.6V, ER14252, or equivalent, 1/2AA size battery that you supply.
- Page 2 1. Release the four snap-fit tabs and remove the battery box cover. 2. Loosen the + and - terminal screws and pull out the black and red wires. Terminal Screws Snap-fit Tabs (X4) 3. Remove the cable-clamp screw, cable, and the cable clamp. Rockwell Automation Publication 2198-IN022A-EN-P - May 2019...
- Page 3 3. Insert the wires into + and - terminals. Torque the cable-clamp screw to a maximum of 0.35 N•m (3.098 lb•in). Terminal Wire Color Black 4. Install the battery. See Install Battery on page 5. Replace the cover. Rockwell Automation Publication 2198-IN022A-EN-P - May 2019...
- Page 4 Rockwell Automation maintains current product environmental information on its website at http://www.rockwellautomation.com/rockwellautomation/about-us/sustainability-ethics/product-environmental-compliance.page. Allen-Bradley, Kinetix, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc. EtherNet/IP is a trademark of ODVA, Inc. Trademarks not belonging to Rockwell Automation are property of their respective companies.