Disassembling Filter Cover; Installation Of The Filters; Power Supply; Placement - Philco Home Series User Manual

Disassembling filter cover
• Disassembly diagram
lift
up the unit with one hand and open the side cover with another hand by holding up from the
bottom of the cover.
• Installation diagram
l.Piease insert the top part of side cover into the slot.
2.Press down the bottom part of side cover, and confirm it is installed well.
Installation of the filters
• Take off right side cover.
• Take out Antimicrobiai+HEPA, activated carbon+photo catalyst filter, and tear off its PE bag,
please install filters sequentially.
Take off right side cover
7
Install activated carbon+photo catalyst filter
Install Antimicrobiai+HEPA
Power supply
• AC voltage
Power plug
Please don't connect this machine with wrong voltage of power supply, inserting the plug firmly
into the power socket.
Placement
• Please keep the machine air inlet and outlet 30cm or more away from the wall and home
furniture
• Do not use the machine in front of heat source outlet.
8