Omnilight HUE-DMX Series System Setup

Advertisement

Quick Links

Initial Setup

Connect HUE-DMX-CONTROLLER, HUE-DMX-DECODER(s), Power Supplies and LED Ribbon in accordance
with the wiring diagram.

Setting Zones to Control on the HUE-DMX-DECODER (8 Zone Maximum)

Hold the button below the address number you desire to change for approximately five seconds
While the number is flashing, press the button to cycle through 0-9
Once the desired number is reached, do not press any buttons on the HUE-DMX-DECODER for approxi-
mately five seconds

HUE-DMX System Setup

HUE-DMX-CONTROLLER
HUE-DMX-DECODER
To Next Decoder
Number will begin to flash
Number will stop flashing
SET HUE-DMX-DECODER ZONES ACCORDING TO TABLE BELOW
Zone
Address
1
001
2
005
3
009
4
013
5
017
6
021
7
025
8
029

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HUE-DMX Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Omnilight HUE-DMX Series

  • Page 1 HUE-DMX System Setup Initial Setup • Connect HUE-DMX-CONTROLLER, HUE-DMX-DECODER(s), Power Supplies and LED Ribbon in accordance with the wiring diagram. HUE-DMX-CONTROLLER HUE-DMX-DECODER To Next Decoder Setting Zones to Control on the HUE-DMX-DECODER (8 Zone Maximum) • Hold the button below the address number you desire to change for approximately five seconds Number will begin to flash •...
  • Page 2 Pairing HUE-RF/DMX-REMOTE • Turn on the HUE-RF/DMX-REMOTE The red indicator light on the top right of HUE-RF/DMX-REMOTE will come on • Press the learn button on the HUE-DMX-CONTROLLER Learn Button • Select a zone on the HUE-RF/DMX-REMOTE that has HUE-DMX-DECODER(s) addressed to it •...
  • Page 3 Operating Instructions Controlling Zone(s) • Select a zone number (1-8) to control a single zone independently or multiple zone numbers to control zones together Turn Colors On/Off • Touch the R, G, B, or W buttons to switch the corresponding color on or off If you press R then G, these colors will be mixed.
  • Page 4 Operating Instructions Continued Saving Colors and/or Modes • Each zone can save eight colors or modes using the button. To do so: 1. Choose a zone number(s) 1-8 2. Turn on the mode or color that you would like to save 3.

This manual is also suitable for:

Hue-dmx-controllerHue-dmx-decoderHue-dmx system

Table of Contents