Before First Use; Daily Use - Zanussi THE8051 User Manual

BUZZER ON/OFF
To deactivate or activate the acoustic signals, press
and hold for approximately 2 seconds touch
buttons (B) and (C) at the same time.
ADJUSTMENT OF THE REMAINING LAUNDRY
MOISTURE DEGREE
To change the default degree of the remaining
moisture of the laundry:
1. Press the on/off button to activate the
appliance.
2. Wait approximately 8 seconds.

BEFORE FIRST USE

Before you use the appliance for the first time:
• Clean the tumble dryer drum with a moist cloth.
• Start a 1 hour programme with moist laundry.

DAILY USE

START A PROGRAMME WITHOUT DELAY
START
1. Prepare the laundry and load the appliance.
CAUTION! Make sure that when
you close the door, the laundry
does not get caught between the
appliance door and the rubber
seal.
2. Press the on/off button to activate the
appliance.
3. Set the correct programme and options for the
type of load.
The display shows the programme duration.
The drying time you see on the display,
when the cotton programme is
selected, is related to the load of 5 kg
and standard conditions . Real drying
time will depend on type of the load
(quantity and composition), the room
temperature and the humidity of your
laundry after spin drying phase.
4. Press the Départ/Pause (Start/Pause) touch
button.
The programme starts.
10
3. Press and hold buttons (B) and (D) at the same
time.
One of the these indicators comes on:
• the maximum dry laundry
• the more dry laundry
• the standard dry laundry
4. Press the button (F) again and again until the
indicator of the correct level comes on.
5. To confirm the adjustment, press and hold
buttons (B) and (D) at the same time for
approximately 2 seconds.
At the beginning of the drying cycle
(first 3-5 min) there could be a slightly
higher sound level. This is due to the
compressor starting up. This is normal
for compressor powered appliances
such as refrigerators and freezers.
STARTING THE PROGRAMME WITH DELAY
START
1. Set the correct programme and options for the
type of load.
2. Press the delay start button again and again
until the display shows the delay time you want
to set.
You can delay the start of a
programme from a minimum of 60
minutes to a maximum of 20
hours.
3. Press the Départ/Pause (Start/Pause)
touchpad.
The display shows the countdown of the delay
start.
When the countdown is completed, the programme
starts.
CHANGE A PROGRAMME
1. Press the on/off button to deactivate appliance
2. Press the on/off button to activate the
appliance.
3. Set the programme.
STAND-BY FUNCTION
To decrease the energy consumption, this function
automatically deactivates the appliance: