EN 61010-1, EN 61010-2-051, EN ISO 12100, EN 61326-1 and EN 60529� › Read the operating instructions completely before starting up and follow the safety A copy of the complete EU Declaration of conformity can be requested at sales@ika�com� instructions.
› Hearing protection must be worn when working with the device in high speed� The MultiDrive basic device is a batch mill / mixer that can be operated with different vessels� With this device and different vessels, a variety of grinding (impact grinding, cutting grinding) Notice! and mixing tasks can be performed in the laboratory�...
Useful information /// Blending In combination with the IKA MultiDrive BL 2000 blending vessel, the device can be used as The device can be used in a wide range of applications in conjunction with different vessels� a blender� The blender can be used for many applications� The following list is not complete and can be /// Milling extended by experiments�...
Timer button Switch between the setting of speed and timer� Time display Show the timer/counter value� Speed display Show the speed value� IKA MultiDrive basic Disassembly tool I Power cord set Disassembly tool II USB cable User guide Socket wrench...
Installation /// Connecting to power /// Filling the vessel Notice! The socket used must be earthed (fitted with earth contact)� Observe the ambient conditions (temperature, humidity etc�) listed under “Technical Data”� 2000 ml (max) 1500 ml 220 - 240 V ~ 50/60 Hz 1000 ml 1000 W...
Operation /// Switching on /// Setting the speed Interval Timer Counter green Speed x 1000 rpm min:sec Interval Timer Counter Speed x 1000 rpm min:sec Interval Timer Counter Speed x 1000 rpm min:sec Interval Timer Counter Speed x 1000 rpm min:sec Interval Timer...
Page 10
/// Setting the timer Counter: Interval Timer Counter Interval min:sec Timer Counter Speed x 1000 rpm min:sec Timer: Interval Interval Timer Timer Counter Counter min:sec min:sec Note: If the counter function is activated, the counter automatically starts to run from 0 seconds to 5 minutes�...
/// Starting the running Error codes Any malfunctions during operation will be identified by an error message on the display� Proceed as follows in such cases: › Turn off the device by using the power switch� › Carry out corrective measures� ›...
Please also use suitable transport packaging� Install the driver by running the setup file� Connect the IKA device through the USB data cable to the PC� The data communication runs through a virtual COM port� /// Command syntax and format: The following applies to the command set: ›...
1�1)� General data The NAMUR commands and the additional specific IKA commands serve only as low level com- mands for communication between the device and the PC� With a suitable terminal or commu- Voltage 220 ���...
Warranty In accordance with IKA warranty conditions, the warranty period is 24 months� For claims under the warranty please contact your local dealer� You may also send the machine direct to our factory, enclosing the delivery invoice and giving reasons for the claim� You will be liable for freight costs�...
Page 15
Phone: +81 6 6730 6781 Phone: +91 80 26253 900 Phone: +44 1865 986 162 eMail: info@ika�in eMail: info_japan@ika�ne�jp eMail: sales�england@ika�com Discover and order the fascinating products of IKA online: www.ika.com IKAworldwide IKAworldwide /// #lookattheblue @IKAworldwide Technical specifications may be changed without prior notice�...
Need help?
Do you have a question about the MultiDrive basic and is the answer not in the manual?
Questions and answers