Litelume Sports Lighter Small Installation Instructions

Sports Lighter Small
Installation Instructions
Warning
1. To avoid electric shock, disconnect power at source prior to installation.
2. The installation should be performed by qualified electricians or lighting technicians.
3. Before conducting any installation, maintenance, or removal, disable all power to the luminaries and wait until the fixture cool
down.
4. Do not touch the fixture while it is in service.
5. If there is any problem with the fixture, DO turn off power and DO NOT attempt repair unless you are a qualified technician or
the customer service member.
Light Barrier Installation Instructions
Light barrier
Installation Instructions
1. Fix the M20 bolt at the mounting surface plate.
2. Fix the rotatable bracket on the M20 bolt.
3. Put the plain washer& lock washer in the M20 bolt.
www.litelume.com
info@litelume.com
©Lite Lume Corporation 2018
833.LED.LUME
Heat sink
Put the light barrier on the lamp body
Mounting surface plate
Page 1/3 LITELUME™ seeks to deliver the most advanced and efficient LED technology. Due to
technology progression, specifications may change. We reserve the right to update product
Rev Date: 08/19/2018 specifications without notice. Contact LITELUME™ for the most up-to-date data.
Use 6 pcs of M5*12mm Hex Screw to unlock
the light barrier on the lamp body
M20 Bolt
M5*12mm Hex Screw