CERAMIC FAN HEATER PTC-150A 120V~60Hz 1500W USER INSTRUCTIONS Please read the instruction carefully before using and keep it properly. Warning: Never cover the heater and avoid being scalded by it.
Page 2
Operating instructions for model number: PTC-150A Thank you for buying this ceramic fan heater. Please read these instructions carefully and keep them in a safe place for future reference. When switched on for the first time a slight odor might be emitted for a few minutes. This is harmless and occurs with most heaters when any slight traces of dust or lubricants that may have collected in the factory are heated away.
Page 3
● Turn the control dial to “I” for low heat and “II” for full heat. ● Set the level of heat by turning the thermostat dial gradually clockwise for the lowest heat and fully clockwise for maximum. ● The thermostat will turn the machine off when the selected room heating is achieved, and when the temperature drops it will turn on again automatically.
Need help?
Do you have a question about the PTC-150A and is the answer not in the manual?
Questions and answers