Download Print this page

Sander Ozonizer S 500 Instructions For Use Manual page 7

Advertisement

Disturbances
Disturbance of high voltage (3)
The Ozone element can be disturbed by water or dirt that has seeped into the Ozone element. Pull
the power cable, blow pressed air through the Ozone element to get rid of water, clean as
described above.
Disturbance of temperature (4)
Cause of overheating: Insufficient surrounding fresh air (example: a closed technical cabinet) leads
to less air flowing through the device during a maximum performance setting. The Ozonizer will
start up automatically after cooling down.
Should the disturbance continue after cleaning, send the Ozonizer in for an official check-up.
Disposal
The wrapping consists of non-polluting materials which you can dispose of at any
local recycling collection places.
Possibilities for disposing the used product can be asked about at your municipal
administration. In interest of general environmental protection, do not dispose of
the device in domestic garbage, but provide for an appropriate way of disposal.
You can be informed about garbage collecting places and opening hours at your
public administration.
Erwin Sander Elektroapparatebau GmbH
Am Osterberg 22
Telefon +49 5173 971-0
info@aqua-sander.de
DE 31311 Uetze-Eltze
Telefax +49 5173 971-197
www.aqua-sander.de
Aquarientechnik

Advertisement

loading

This manual is also suitable for:

Ozonizer s 1000