Start-Up; Installation - Homematic IP HmIP-CCU3 Mounting Instruction And Operating Manual

Start-up

7 Start-up
For set-up of the CCU3, an active Internet con-
nection must be available. After successful set-up
and configuration, operation can still be carried
out also in case of an inactive Internet connec-
tion.
7.1

Installation

After installation, you can start up your CCU3. To do this,
please proceed as follows:
• Connect the CCU3 via the network connection
(B) and the supplied network cable to your router
(see figure 3).
• Establish the power supply for your device via in-
terface (D) and the supplied plug-in mains adapt-
er (see figure 3).
If the device LED (A) lights up permanently blue, the
CCU3 is ready for operation and you can continue the
set-up.
You will find further information about the flashing be-
haviour in section „8.1 Error codes and flashing sequenc-
es" on page 46 .
38