Download Print this page

camry CR 5027 User Manual page 4

Advertisement

18. DO NOT allow for prolonged contact hot steam iron with fabric or flammable materials.
19. Be careful that the power cord does not touch the hot soleplate. Allow the iron to cool
completely before storage.
20. If you do not use iron, even for a short time, turn off the options of steam
21. Under no circumstances should be ironed clothes and fabrics that are on humans or
animals.
22. Never direct the steam to humans or pets.
23. Use self-cleaning function at least once a month.
24. Iron must be used at a stable even surface and this can only be disposed of.
25. Do not fill the water tank with chemicals, perfumes or descaling substance.
26. Do not touch steaming cord because it causes burns
27. Do not use the device wet hands and in wet room. If the device fall into the water first
turn off power cord.
DESCRIPTION OF DEVICE
1. Pairing Button
3.Temperature regulator
5 Steam station
7. Steam cord
9. Steam Ready Indicator
11. Steaming regulator
13. Water Inlet Cover
15. Water Tank Lock
ANTI-CALC function
A special resin filter inside the water reservoir softens the water and prevents scale build-up in the plate. The resin filter is permanent and
does not need replacing.
PLEASE NOTE: Use tap water only. Distilled and/demineralised water makes the "Zero-Calc" anti-calc system ineffective by altering its
physicochemical characteristics.
IRONING
First use
When using the iron for the first time, you may notice a slight emission of smoke and hear some sounds made by the expanding plastics. This is
quite normal and it stops after a short time. We also recommend passing the iron over an ordinary cloth when using it for the first time.
Preparation
Sort the laundry to be ironed according to the international symbols on the garment label, or if this is missing, according to the type of fabric.
GARMENT
LABEL
Start ironing the garments requiring a low temperature.
This reduces the waiting times (the iron takes less time to heat up than to cool down) and eliminates the risk of scorching the fabric.
STEAM IRONING
Check that the plug is disconnected from the socket. Move the steam selector (C) to "0" . Open the lid (B). Raise the tip of the iron to
help the water enter the opening without overflowing. Slowly pour the water into the reservoir using the special measure and taking care
not to go over the maximum level (about 300ml) indicated by "MAX" on the reservoir. Close the lid (B). Place the iron in a vertical
position. Plug it to the electricity. Set the thermostat knob in accordance with the international symbol on the cloth's labels. Thermostat
control light indicates that the iron heats up. Wait until the indicator light off. You can then start ironing.
Warning: When you ironing, the thermostat control light turns on from time to time, this means that the selected temperature is maintained
2. Single steam
4. Iron
6. Pug
8. Power cord
10. Indicator of water
12. switch
14.Water tank
FABRIC
TYPE
synthetic
silk - wool
Cotton - linen
ENGLISH
THERMOSTAT
REGULATION
low temperature
medium temperature
high temperature
Fabric not to be ironed
4
·
··
···

Advertisement

loading