Advertisement
1. To obtain full use of the cabinet, we recommend reading this instruction manual.
2. It is the user's responsibility to operate the appliance in accordance with the in-
structions given.
3. Contact your dealer immediately in case of any malfunctions.
4. Place the cabinet in a dry and ventilated place.
5. Keep the cabinet away from strongly heat-emitting sources and do not expose it
to direct sunlight.
6. Always keep in mind that all electrical devices are sources of potential danger.
7. Do not store inflammable material such as thinner, gasoline etc. in the cabinet.
8. We declare that no asbestos nor any CFC are used in the construction.
9. The oil in the compressor does not contain PCB.
Remove the wooden pallet and the packing. External surfaces are supplied with a
protection foil, which must be removed before installation.
The cabinet operates on 230 V/50 Hz. The wall socket should be easily accessible.
All earthing requirements stipulated by the local electricity authorities must be
observed. The cabinet plug and wall socket should then give correct earthing. If in
doubt, contact your local supplier or authorized electrician.
The flexible cord fitted to this appliance has three cores for use with a 3-pin 13-
Amp or 3-pin 15- Amp plug. If a B.S. 1363 (13-Amp) fused plug is used, it should
be fitted with a 13-Amp fuse.
The wires in this mains lead are coloured in accordance with the following code:
Green/Yellow: Earth, Blue: Neutral, Brown: Live.
The main electrical connections must be done by skilled electricians.
Before use, we recommend that the cabinet is cleaned, (see the section on
maintenance and cleaning).
3
Important safety instructions
Unpacking and installation
Electrical connecting
Start-up of the cabinet
Advertisement
