Advertisement
Quick Links
Hamry 3567, 580 01 Havl. Brod, Czech Rep.
tel + 420 569 433 620 fax + 420 569 422 144
1-cube@1-cube.com
www.1-cube.com
OXI
OXYGEN MEASURING DEVICE
USER'S GUIDE
Contents:
6. Service, changing the O
cap, refuse disposal
2
7. Installation - of communication program into PC and
measured data transfer
Advertisement
Related Manuals for 1-CUBE OXI
Summary of Contents for 1-CUBE OXI
-
Page 1: Table Of Contents
Hamry 3567, 580 01 Havl. Brod, Czech Rep. tel + 420 569 433 620 fax + 420 569 422 144 1-cube@1-cube.com www.1-cube.com OXYGEN MEASURING DEVICE USER’S GUIDE Contents: 1. Range of supply and device application 2. Installation - putting the device into operation 3. -
Page 2: Range Of Supply And Device Application
1. Range of supply and device application Standard range of supply: O2 measuring device type OXI- 1 pc Connecting hoses lenght 1 m- 2 pcs Rechargeable adapter 24 V DC/200 mA – 1 pc Optional accesories: DVD with SerialWatcher programme to display the measured data in PC- 1pc... -
Page 3: Safety Recommendations
Measuring device OXI can be used only for determination of O content in the range of measured values determined by technical conditions. Never connect the measuring device to the withdrawal spots where measured parameters are over measuring capacity of the device. - Page 4 5.1.2 CLEANING OF THE DEVICE: Connect the device by fixing of inlet hose with the connection (4) on oximeter (see pic.2) to the water cock. In case it is not possible to connect the inlet hose to the water cock please use the corresponding reduction – attach the corresponding hose to the reduction.
- Page 5 CONTENT MEASUREMENT Follow the paragraphs 5.1.1. then further: 1) Press the key ON to switch on the device. The text „1-CUBE“ with the program version appears on the display for a moment. Then the following text appears: „ENT.meas.“ „+ view.“...
- Page 6 (450 values) and newly measured values will be saved in sequence from beginning of the memory. 1) Press the key ON to switch on the device. The text „1-CUBE“ with the program version appears on the display for a moment. Then the following text appears: „ENT.meas.“...
- Page 7 Replace batteries as shown below 6.0 SERVICE For service contact the manufacturer: 1-CUBE, Hamry 3567, 580 01 Havl.Brod, Czech Rep. tel. 00 420- 569 433 620 fax.00 420-569 422 144 1-cube@1-cube.com At the end of the apparatus life we recommend to follow the Waste Act.
- Page 8 6.1 CHANGING THE O2-SENSOR CAP Loosen the connector (7) and unscrew O cap (5) from the measuring chamber (3) (see pic. 2).
- Page 9 Pic. 2 Oximeter set Legend: 1. Outlet hose reduction 2. Control valve 3. Measuring chamber 4. Intlet hose reduction 5. O -Electrode 6. Keyboard with display see pic. 1 7. O -Electrode Connector 8. Oximeter body with microcomputer 9. Connector input see pic. 4...
- Page 10 Pic. 3 Set – Oxi hopped wort measurement ICAS 2 Legend: 1. Outlet hose reduction 4. Intlet hose reduction...
- Page 11 2) Run the program SerialWatcher in your PC and set the corresponding COM port (f.e..COM 5), speed of transfer 9600 and Display ASCII. 3) Press the key ON to switch on the device OXI comfort . The text „1-CUBE“ with the program version appears on the display for a moment. Then the following text appears: „memory“...