Headset Volume Control; Using Headset Feature - Sylvania STC590 Owner's Manual

Cordless Telephone Operation
HANDSET Volume Control
1. To adjust the HANDSET receiver volume
level while having a conversation, press the
Vol(Volume) button ( )
Screen will display "VOLUME"
2. Press the SCROLL UP
button to select the desired setting of Low,
Medium, High or Maximum.
3. After volume setting, press vol (
or Esc button to the TALK mode.
Using the Headset Feature
Your telephone can utilize a headset (not included) to be connected to your
HANDSET for you to enjoy hands-free communication.
Insert the small plug on the end of the
headset into the HEADSET JACK at the left
side of the HANDSET.
procedures discussed in "Receiving Calls"
and "Placing Calls" to receive and place a
call.
NOTE:
When you plug the headset plug into the
HEADSET JACK it automatically mutes
the MICROPHONE and SPEAKER of the
HANDSET. Unplug the headset to return
the HANDSET to normal use.
Headsets are available at most retail
outlets that sell telephone equipment. The
HEADSET JACK is compatible with 2.5
mm headset plugs only.
button. The LCD
or DOWN
)button
Follow the
13
VOLUME VOLUME VOLUME
min min min sec sec sec
01 01 01 45 45 45
VOLUME VOLUME VOLUME
min min min sec sec sec
01 01 01 45 45 45