Do you have a question about the Professional 4000 Hot and is the answer not in the manual?
Questions and answers
Summary of Contents for Vortex Professional 4000 Hot
Page 1
Owner’s Manual PROFESSIONAL 4000 HOT Warning: These are commercial grade pressure washing machines intended for use by trained operators. Read this manual thoroughly to avoid personal injury or property damage. Warning: This product can expose you to chemicals including soots, tars, lead, and mineral oils, which are known to the State of California to cause cancer, and carbon monoxide, which is known to the State of California to cause birth defects or other reproductive harm.
Page 3
Understanding the Machine Safety Labels The machine safety label shown below is placed on your machine to draw attention to potential safety hazards. Hazard Symbols and Meanings Safety Rules: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
Page 5
IMPORTANT: Read entire owner’s manual before you attempt to operate your new pressure washer. For electric units, read AR manual included. Remove Pressure Washer From Pallet • Remove all accessories and parts bag included with pressure washer • Remove all other packaging •...
Page 6
Connect Hose and Water Supply to Pump NOTICE - IMPORTANT: Assemble the nozzle extension to the spray gun and attach all hoses before starting the engine. Failure to connect water supply before starting will damage the pump! • Uncoil the high pressure hose and attach one end of the hose to the base of the spray gun. Tug on hose to be sure of a tight connection.
Page 7
How to Start Your Pressure Washer To start your pressure washer for the first time, follow these instructions step-by-step. This starting information also applies if you have let the pressure washer sit for more than 24 hours. • Make sure unit is in a level position and that the gas and burner fuel tanks have adequate fuel. •...
Page 8
Pull back on the collar, insert the new nozzle and release the collar. Tug on the nozzle to make sure it is securely in place. For most effective cleaning, keep the spray nozzle between 8 to 24 inches away from the surface to be cleaned. If you get the spray nozzle too close, you may damage the surface.
Page 9
negligence. To receive full value from the warranty, the operator must maintain the pressure washer as instructed in this manual and the included engine and pump manuals. • Some adjustments must be made periodically to properly maintain your high pressure washer. •...
Page 10
Warranty service must be performed by a service dealer authorized by Vortex Industries, Inc. to service the type of product involved, which will use only new or remanufactured parts or components furnished by Vortex Industries, Inc. To find your local dealer go to www.vortexxpressurewashers.com or e-mail info@vortexindustriesinc.com.
Page 11
G. NO DEALER WARRANTY – The selling Vortexx dealer makes no separate warranty of its own and the dealer has no authority to make any representation or promise on behalf of Vortex Industries, Inc., or to modify the terms or limitations of this warranty in any way.
2750HD Prosumer (VX20303D) 3000HD Professional 3000 (VX20305D) 4000HD Professional 4000 (VX30405D) 4000XG Pro + Gear Drive (VX30406G) 1900E Professional Electric -630 (VX50202E) 4000HOT Professional 4000 HOT (VX70606H) 739 S. MILL ST. PLYMOUTH, MI 48170 | 855-VOR-TEXX or 855-867-8399 | WWW.VORTEXXPRESSUREWASHERS.COM...
Need help?
Do you have a question about the Professional 4000 Hot and is the answer not in the manual?
Questions and answers