Advertisement
Quick Links
Page 5
4
5
7
CLEANING AND MAINTENANCE
1.
Before carrying out any maintenance or cleaning operations the mains electrical supply MUST be
disconnected.
2.
CLEANING AND MAINTENANCE SHOULD BE CARRIED OUT BY A QUALIFIED PERSON
3.
Before attempting to remove the motor impeller assembly disconnect the cable by removing the
terminal block inside the control box.
4.
Loosen the screws (Fig.8) without taking them off.
5.
Rotate slightly and remove the motor-impeller assembly (Fig. 8).
6.
Clean the motor-impeller assembly either with a dry brush or a dry cloth.
7.
Electrical parts cannot be cleaned.
8.
Reassemble in the reverse order to above (Fig 9).
8
9
Page 6
WIRING and COMMISSIONING DIAGRAMS
6
Standard
With Humidistat
MBOX200/2DC/160119
Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Buckinghamshire, HP12 3RH
Tel: +44 (0)1494 522333. Fax: +44 (0)1494 522337. Email: sales@vectaire.co.uk
"Microbox"
DC Models
MBOX 200/2DC
MBOX 200/2DCH
Continuous Mechanical Extract Ventilation
Unit with Low Energy DC Motor - for
domestic and commercial use
Installation, Operating and Maintenance
Instructions
E O.E
Advertisement
Summary of Contents for Vectaire Microbox MBOX 200/2DC
- Page 1 Clean the motor-impeller assembly either with a dry brush or a dry cloth. Electrical parts cannot be cleaned. Reassemble in the reverse order to above (Fig 9). Vectaire Ltd, Lincoln Road, Cressex Business Park, High Wycombe, Buckinghamshire, HP12 3RH Tel: +44 (0)1494 522333. Fax: +44 (0)1494 522337. Email: sales@vectaire.co.uk E O.E...
- Page 2 Page 2 Page 3 Page 4 "MICROBOX" - CONTINUOUS MECHANICAL EXTRACT UNIT INSTALLATION AND OPERATING INSTRUCTIONS To avoid the risk of fire, do not use the product in the presence of inflammable substances or vapours such PLEASE READ THE FOLLOWING INSTRUCTIONS VERY CAREFULLY BEFORE USING THE PRODUCT. THE as alcohol, insecticides, gasoline, etc.