Summary of Contents for Conti Grinder 200
- Page 1 CG-200 OD 사용자 매뉴얼 - Edition 11/2016 SACOME, Document CONFIDENTIEL, Ne peut être reproduit ni communiqué sans notre accord préalable. SACOME, CONFIDENTIAL Document, it is forbidden to duplicate or communicate this document without previous authorization.
-
Page 3: Table Of Contents
PREFACE ________________________________________________________________ 14 TECHNICAL SPECIFICATIONS ______________________________________________ 14 GENERAL DESCRIPT ON ___________________________________________________ 14 UNPACKING AND INSTALLATION: ___________________________________________ 15 OPERATION ______________________________________________________________ 16 ACCESSORIES ___________________________________________________________ 17 SAFETY DEVICES _________________________________________________________ 19 MAINTENANCE AND SERVICE ______________________________________________ 20 CLEANING _______________________________________________________________ 20 Edition 11/2016 - CG200 OD SACOME, Document CONFIDENTIEL, Ne peut être reproduit ni communiqué... - Page 4 Edition 11/2016 - CG200 OD SACOME, Document CONFIDENTIEL, Ne peut être reproduit ni communiqué sans notre accord préalable. - 12 -...
- Page 5 WARNINGS This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
-
Page 6: Preface
1. PREFACE Congratulations for purchasing the CG200 OD grinder with dispenser. The CG200 OD is a commercial appliance to be used in coffee shops, espresso bars, hotels, restaurants, etc. CG200 OD will grind whole been coffee into variable, user selectable (from super fine to course) coffee powder and will dose It to your espresso machine filter holder. -
Page 7: Unpacking And Installation
4. UNPACKING AND INSTALLATION: Warning: All appliances’ technical handling operations such as installation, maintenance, or service should be performed by certified personnel or by your local dealer. • After opening the box, make sure that the appliance is intact and that there is no visible damage. -
Page 8: Operation
5. OPERATION Grinding coffee with CG200 OD: Continues mode selector Counter selector button Programming dial Fig.5.1 Modes of operation: The CG200 OD can be operated in 3 different modes (Fig.5.1) Activating (or deactivating) each one of the modes, is achieved by single pressing on the relative mode selector button. - Page 9 Dose counting LCD: • The CG200 OD model is equipped with 3 independent dosing counters. • In order to view each one of the counters a single press on the counter selector will flip the LCD to the next counter and the relative counter’s LED will turn on. •...
-
Page 10: Accessories
6. ACCESSORIES • Filter holder support Fig.6.1 Fig.6.2 Fig.6.3 Fig.6.4 • Notice the two holes under the filter fork support (fig.6-1) • Unpack the accessory (fig.6.2), which is packed separately within the grinder packaging. • Insert the accessory into the 2 holes (fig.6.3) •... -
Page 11: Safety Devices
7. SAFETY DEVICES Thermal overload protection In order to eliminate the risk of fire the motor is equipped with an overheat protection device which will cut off the motor’s power supply should it reach a high temperature. • In the event that the thermal protection is tripped as a result of malfunction (e.g.: jammed blades, worn out bearings, foreign object in grinding chamber, etc.) the appliance main switch should be turned off immediately and the main power plug must be disconnected. -
Page 12: Maintenance And Service
8. MAINTENANCE AND SERVICE Warning: All appliances’ technical handling operations, such as installation, maintenance or service should be performed by certified personnel or by your local dealer. Good condition blades will result in a high quality grind and prevent the appliances overheating. Replace grinding blades every 400KG of grinded coffee (using only original replacement parts) Be aware of the appliance’s noise level. - Page 13 C. Cleaning the grinding chamber grinding parts and powder outlet housing • Follow the instruction below for grinding chamber and grinding parts cleaning: Step 1 Step 2 Step 3 Step 4 By using a screw driver Pull out the upper Use a brush, a dry Use a brush, a dry cloth, blade holder;...
- Page 14 L a R u c h e - 1 , A v e n u e A l b e r t I I - B . P . 1 1 9 - M C 9 8 0 0 7 M O N A C O C e d e x T é...