Advertisement
GUILD
500W Spray gun
Instruction Manual
Important
- Please read these instructions fully before operating or maintaining your Guild Spray gun
These instructions contain important information that will help you get the best from your Guild
Spray Gun, ensuring it remains safe to operate.
If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989
After Sales Support
UK/Ireland 0333 3201989
Help@guildpowertools.co.uk
PRG500G
Advertisement
Related Manuals for Guild PRG500G
Summary of Contents for Guild PRG500G
- Page 1 Important - Please read these instructions fully before operating or maintaining your Guild Spray gun These instructions contain important information that will help you get the best from your Guild Spray Gun, ensuring it remains safe to operate. If you need help or have damaged or missing parts, call the Customer Helpline on 0333 3201989...
-
Page 2: Table Of Contents
Contents Safety Information.....................3 In The Box........................6 Accessories........................6 Operating Instructions....................7 Troubleshooting.......................12 Technical Data......................13 Environmental Protection..................14 Guarantee........................15 Customer Helpline 0333 3201989... -
Page 3: Safety Information
Safety Information Important - Please read these instructions fully before starting assembly Warning Symbols The following warning symbols appear throughout this assembly manual and indicate the appropriate safety measures you should take when assembling and operating the belt sander. To reduce the risk of injury. Please read the instruction manual Warning Wear ear protection Wear eye protection... - Page 4 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference.
- Page 5 Safety Information Important - Please read these instructions fully before starting assembly General Power Tool Safety Warnings control of the power tool in unexpected situations. f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
-
Page 6: In The Box
In The Box Parts Air cap Trigger Flow rate adjustment screw Nozzle Cap nut Spray gun Viscosity cup Air hose Nozzle cleaning needle On / Off switch Blower Shoulder strap Container 9 10 Accessories Viscosity cup Nozzle cleaning needle Shoulder strap Customer Helpline 0333 3201989... -
Page 7: Operating Instructions
Operating Instructions NOTE: Before using the tool, read the instruction book carefully. Intended Use The spray gun is for spraying non-flammable and non-hazardous paints and varnishes suitable. The tool could not be used for spraying of flammable liquids. Do not use the tool for the food, pharmacy or other purposes that are not mentioned in the manual. - Page 8 Operating Instructions 4. CONNECT THE AIR HOSE TO THE TOOL. 1) Insert the air hose end to the guide at side of device firmly. (See Fig. B1) 2) Insert another side of air hose to the connector of gun side firmly. (See Fig. B2) 5.
- Page 9 Operating Instructions 6. ON/OFF SWITCH (SEE FIG. D) To start the tool, depress the protective cover over the switch indicated by the mark “I”. To stop the tool, depress the protective cover indicated by the mark “O”. 7. TAKE THE SPRAY GUN OUT OF THE GUN HOLDER (SEE FIG. E) This tool is equipped with 1.8m air hose.
- Page 10 Operating Instructions 10. ADJUSTMENT OF THE SPRAY GUN Selection spray patterns 1) Unscrew the cup nut. 2) Setting the position of air cup to the desired situation. The Horizontal position of air cup(SEE FIG. G1)=the spraying shape is vertical: for vertical surface. The vertical position of air cup (SEE FIG.
- Page 11 Operating Instructions 11. SPRAY TECHNOLOGY 1) The intended surface should be smooth and clean. And the surface must be pretreated and dust-free. 2) Surface not to be sprayed must be covered with tape and newspaper. 3) Cover screw or similar at the object need to be covered. 4) It is important to perform on cardboard or a similar surface spray sample to find the right spray gun setting.
-
Page 12: Troubleshooting
Troubleshooting Problem Cause Remedy Nozzle clogged Clean Riser clogged Clean Small holes on the riser Clean pipe clogged No coating Flow setting is at min level Rotate the flow rate adjustment material come out screw clockwise from Nozzle Riser loose Tighten the riser Container loose Tighten the container... -
Page 13: Technical Data
Technical Data Technical Data Table Voltage 220-240V~50Hz Power consumption 500 W Nozzle size 2.5mm Max air volume flow 600ml/min Max viscosity 60DIN-s Air hose length 1.8m Tank capacity 800 ml Spraying pressure 0.1-0.2bar Protection degree 1.82kg Weight Noise Information A weighted sound pressure :83dB(A) A weighted sound power : 94dB(A) -
Page 14: Environmental Protection
Technical Data Vibration Information Helping to minimise your vibration exposure risk. Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate) If the tool is to be used regularly then invest in anti vibration accessories. Plan your work schedule to spread any high vibration tool use across a number of days. Environmental Protection Waste electrical products must not be disposed of with household waste. -
Page 15: Guarantee
Guarantee This product is selected for DOMESTIC USE ONLY and not for business use. This product is guaranteed against manufacturing defects for a period of 24 months. This does not cover the product where the fault is due to misuse, abuse, use in contravention of the instructions, or where the product has been the subject of unauthorised modifications or alterations, or has been the subject of commercial use.