Technical Data; Safety Instructions - auna MIC 920 Series Manual

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the
following hints on installation and use to avoid technical damages. Any failure caused by ignoring the
mentioned items and cautions mentioned in the operation and installation instructions are not covered
by our warranty and any liability.
Typ: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB condenser microphone
Capsule: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16mm back eletret diaphragm capsule
Polarmuster: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Cardioid
Frequency response: . . . . . . . . . . . . . . . . . . . . . . . . . 20 kHz – 18 kHz
Sensitivity: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -38 dB
Max SPL: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -136 dB
S/N ratio: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68 dB
Connector: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB connector
Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB power
General introduction
The MIC-920B USB condenser microphone has a Cardioid pick-up pattern, standard 3.5mm head-
phone output connector, standard and general-used USB input port. It can be used without installing
any device software when operating in the WINDOWS and MAC systems. Moreover, ii can identify the
recording equipments MAC automatically. It is a plug-and-play headphone monitoring USB condenser
microphone, which opens up possibilities for anyone who records audio from podcasters, journalists,
students and multimedia presentations. MIC-920B adopts 16mm back electret capsule, it ensures the
microphone's vivid sound quality.
Features
• Plug-and-play;
• USB condenser microphone;
• 3.5mm headphone output connector;
• High sensitivity, low noise, wide frequency response.
• Do not store the microphone under direct sunlight, near heating devices or in a hot, humid or dusty
place. Do not allow the microphone to get wet;
• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including) amplifiers) that produce heat;
• Do not subject the microphone to strong impact;
• Do not disassemble, modify or attempt to repair the microphone;
• Clean only with dry cloth;
• When this product is used for a long time, the microphone may become discoloured due to
ultraviolet light (especially direct sunlight) or wear.

Technical Data

Safety Instructions

9