Advertisement
Quick Links
Model CBW1026 Cage and Bottle Washer
General Specifications
1.0
General Description
The Model CBW1026 Cage and Rack Washer is a high capacity spray cabinet washer
capable of processing any items which can be placed inside the washing compartment. It is
specifically designed to clean and sanitize animal cages, bottles, pans, and other items ancillary to
the care of laboratory animals. Several sizes are available, as well as many optional features. The
Model CBW1026 incorporates a large number of innovative and unique features to ensure
thorough, efficient cleaning, as well as many features unique to our design.
2.0
Dimensions
MODEL
CONFIGURATION
1026
1026L
1026LS
1026LLS
1026C
1026LC
*Note: Dimensions are maximum chamber opening sizes. Actual load size must be smaller to
allow for clearances. Custom chamber sizes can be provided as required.
3.0
Reciprocating Spray Headers
3.1
Vertical and horizontal headers, surrounding the load, shall be supplied and equipped with
machined jets. Jets shall deliver an elliptical spray pattern for optimal impact and coverage to the
load. No rotating spray arms shall be utilized.
3.2
Headers shall be interconnected and mounted to a carriage having non-lube wheels
constructed from single pieces of Delrin® homopolymer.
SMC Model 1026 Engineering Specification
Schlyer Machine
Division of Audubon Machinery Corporation
814 Wurlitzer Drive
North Tonawanda, NY 14120
Toll Free (866) 867-7660
fax: (716) 696-3174
http://www.schlyermachine.com
DOOR
CHAMBER SIZE*
VERTICAL LIFT
48" X 32" X 34"
VERTICAL LIFT
48" X 32" X 48"
LOAD SHELF
48" X 32" X 34"
LOAD SHELF
48" X 32" X 48"
CABINET
48" X 32" X 34"
CABINET
48" X 32" X 48"
(W"X H" X L")
EXTERNAL
OVERALL SIZE
72" X 78" X 38-1/2"
72" X 78" X 52-1/2"
72" X 78" X 38-1/2"
72" X 78" X 52-1/2"
72" X 78" X 38-1/2"
72" X 78" X 52-1/2"
Rev. 100812
(W"X H" X L")
Page 1 of 12
Advertisement
Related Manuals for SMC Networks CBW1026
Summary of Contents for SMC Networks CBW1026
- Page 1 General Specifications General Description The Model CBW1026 Cage and Rack Washer is a high capacity spray cabinet washer capable of processing any items which can be placed inside the washing compartment. It is specifically designed to clean and sanitize animal cages, bottles, pans, and other items ancillary to the care of laboratory animals.
- Page 2 Carriage shall be moved reciprocally from end to end within the cabinet by a non- proprietary pneumatic device. No electric motors, gearboxes or cable capstans shall be used. All cable sheaves shall be Delrin® homopolymer with Stainless Steel axles. Failure of the header system to traverse the machine interior within the allotted time shall result in a Fault Condition.
- Page 3 All outputs external to the electrical box shall be low voltage DC, Intrinsically Safe by the definition of OSHA and National Electrical Code (NEC). All devices and components that consume electrical power shall be UL listed and/or approved, and shall bear NEMA (US Standards), IEC (International Standards) or other recognized International ratings appropriate for the use intended.
- Page 4 Microprocessor Control The treatment schedule and all other machine functions shall be controlled by a readily available, non-proprietary, industrial style modular Automation Direct 205 Series programmable controller. The controller and all modules shall be readily available and technical support shall be available from the PLC manufacturer at no charge, without any need to pay any fee to stay in product support.
- Page 5 10.3 A complete list of purchased parts including original part numbers, where the parts were purchased, and the nearest local distributor where the parts can be purchased shall be provided as a standard part of the manual. All purchased machine components such as jets, valves, PLC modules, pneumatic system parts, etc., shall be entirely non-proprietary and available for purchase freely and widely through normal industrial supply outlets.
- Page 6 shall utilize the temperature guarantee circuitry. In this case, timing of the cycle phase shall not begin until the rinse water is recirculating at the setpoint temperature, thus guaranteeing appropriate sanitation. At completion, this rinse water shall be retained in the sump for use as pre-wash water for the next load.
-
Page 7: Materials Of Construction
steam at the rated pressures. No structural-style parts will be acceptable. The coil shall be easily removed for cleaning or maintenance. Under no circumstances shall the coil be welded into place. 30.5 Temperature shall be controlled directly by the PLC. Temperature sensor(s) shall be Type J Thermocouples, connected directly to the analog inputs of the PLC. - Page 8 internal steam piping stainless steel external steam piping schedule 40 black iron temperature booster 304 SS drain piping 304 SS barrier walls 20 gauge, 304 SS - #3 finish 40.0 Optional Features 40.1 Knock-Down Shipment - Machine shall be provided in knocked-down condition, all pieces to pass through a standard man-door, for reassembly at the customer's site.
- Page 9 40.9 Barrier Flanges for Recessing Through Two Walls - Stainless Steel Flanges shall be provided to fully enclose the “clean” and “soiled” ends of the unit from wall to wall and floor to finished ceiling. 40.10 Aesthetic Side Enclosure - A stainless steel enclosure with access door(s) shall be provided to enclose the service and component side of the unit from the floor to the top of the unit.
- Page 10 40.20 The unit shall be equipped with the SMC system, which will allow full loads to be processed in a programmable time period that may be less than 10 minutes. Treatment shall consist of a wash, using partially re-used wash solution, and a rinse using fresh hot water from the Owner’s supply, conducted through an on-board heating system and a completely separate piping and spray header system.
- Page 11 Hot Water 1 FPT, 35 PSI 120-180 Deg. F. 100 Gal/Load Max Drain 1 ½ FPT 140 Deg. F. Max 60 GPM Max Exhaust 6" Dia. 200 SCFM 180 Deg Saturated Compressed 1/2 FPT, 80 PSI <4 SCFM Cold Water 3/4 FPT, 35 PSI 50 GPM Max 15 GPM Avg Flow...
- Page 12 70.0 Additional Engineering Information CBW1026, 1026LS, 1026C CBW1026L, 1026LLS, 1026LC Shipping Wgt. 2100# 2400# Dynamic Wgt. as Installed 1800# 2000# Cage Capacity Std. Mouse Std. Rat Sump Capacity 25 Gals. 25 Gals. Heat Radiation (typ. door end) 3000 btu/hr 3000 btu/hr (typ.
Need help?
Do you have a question about the CBW1026 and is the answer not in the manual?
Questions and answers