1. Manuals
  2. Brands
  3. ELITEL Manuals
  4. Network Router
  5. AH507 Series
  6. User manual

ELITEL AH507 Series User Manual

G.shdsl router
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
G.SHDSL Router – AH507
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AH507 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for ELITEL AH507 Series

  • Page 1 G.SHDSL Router – AH507 User’s Manual...

  • Page 2: Table Of Contents

    G.SHDSL Router - AH507 Version 1.0 Table of Contents 1. PRODUCT OVERVIEW ....................1 1.1 P ......................... 1 REFACE 1.2 O ........................1 VERVIEW 2. HARDWARE INSTALLATION ..................7 2.1 F ................. 7 RONT ANEL NDICATORS 2.2 R ................... 8 ANEL ONNECTORS 2.3 I ...................
  • Page 3 G.SHDSL Router - AH507 Version 1.0 4.4.3 Factory Default....................95 4.4.4 Save........................96 4.5 P ......................96 ERFORMANCE 4.5.1 DSL Performance & Statistic................96 4.5.2 ATM Performance & Statistic................97 5. UPGRADING FIRMWARE ..................98 5.1 U ................98 PGRADE USING THERNET PORT 5.2 U ..................

  • Page 4: Product Overview

    G.SHDSL Router - AH507 Version 1.0 Overview 1.1 Preface The primary objective of this manual is to help network administrator operate AH507 bridge and router product. Strongly committed to user friendly, this manual will guide the users step by step to turn the product up and running in the simplest way ever. 1.2 Overview The AH507 is an ATM based G.SHDSL terminating device enabling the transport of multi mega bits stream over one or two pair of copper wires using TC-PAM technology.
  • Page 5 G.SHDSL Router - AH507 Version 1.0 Features SHDSL Access Support 2/4 wires SHDSL and meet ITU-T G.991.2 standard. ATM Protocols ATM Multi-protocol Encapsulation over ATM Adaption Layer 5 (RFC 1483): Logical Link Control (LLC) encapsulation routed modes Virtual Circuit: Terminates ATM Permanent Virtual Circuit (PVC) with ATM Adaptation Layer 5 (AAL5);...
  • Page 6 G.SHDSL Router - AH507 Version 1.0 Network Interface SHDSL Link Standard: SHDSL per ITU-T G.991.2 Line code: TC-PAM, Support ANSI (ANNEX A) and ETSI (ANNEX B) Data rates: Automatic rate adaptive and manual programmable data rate n x 64 kbps: 2.304 Mbps: 2-wire (line rate: 2.320 Mbps) 4.64 Mbps:...
  • Page 7 G.SHDSL Router - AH507 Version 1.0 User Interfaces Data port Termination: V.35 Rate: N x 64K bps Protocol Support: Frame Relay: Transparent data over ATM AAL5 BVI: Bridge Visual Interface ( optional ) Tunneling: Optional HDLC encapsulation over IP (HDLC, or HDLC Cisco) Clock source: V.35, Internal Connectors:...
  • Page 8 G.SHDSL Router - AH507 Version 1.0 FRF: FRF.5, FRF.8 Power AC 100 to 230 VAC (Build-in AC Connector) DC -42 to -56 VDC AC+DC: AC 100 to 230 VAC, DC -42 to -56 VDC, field selectable Ordering: AH507-i1-i2-i3 AH507-i1-i2-i3 i1 Specify the number of SHDSL loop 02 2 wires on SHDSL transmission 04 4 wires on SHDSL transmission i2 Specify the V.35 FR Serial port...
  • Page 9 G.SHDSL Router - AH507 Version 1.0 IP Network Frame Relay Network ATM Core ATM Switch SHDSL 1 AH507 AH507 SHDSL 2 SHDSL 2 Site 1 Site 2 DSLAM DSLAM Frame Relay CPE Frame Relay CPE Transporting Frame Relay and IP traffic over ATM ATM Switch AH507 Router...

  • Page 10: Hardware Installation

    G.SHDSL Router - AH507 Version 1.0 Installation 2.1 Front Panel LEDs Indicators There are eight LED indicators on the front panel of AH507. They show the statuses of the device. The functions of LED indicators are described in the following table: Color Status Meaning...

  • Page 11: Rear Panel Connectors

    G.SHDSL Router - AH507 Version 1.0 2.2 Rear Panel Connectors The rear panel connectors connecting the device to the LAN and xDSL network are illustrated as follows. Reset -48VDC RJ-11 V.35 DB25 100/100M LAN Phone Line Power Adapter (Showing 2 wires SHDSL) 110VAC / 220 VAC~5VDC Figure 1: Rear Panel and Installation 2.3 Installation Procedure...

  • Page 12: Configuring With Cli

    G.SHDSL Router - AH507 Version 1.0 Configuring 3.1 Console Setup Step 1: Connect computer to the device through the console port as shown in Front Panel. Step 2: Open the terminal emulator software (like Hyper-Terminal on Microsoft Windows machine, or “ Minicom” on Linux machine), then select the proper COM port for the connection.

  • Page 13: Menu Overview

    G.SHDSL Router - AH507 Version 1.0 3.2 Menu Overview You can refer to Main Menu, see section 3.4.1. 3.3 Login 3.3.1 Login - Default Password: admin 3.3.2 Changing System Password You can change the system password by following steps: Login to the Main Menu: Step1.

  • Page 14: Setup

    G.SHDSL Router - AH507 Version 1.0 3.4 Setup 3.4.1 Main Menu It contains all the submenus of management system terminal in which the configuration of device can be set.

  • Page 15: System Overview

    G.SHDSL Router - AH507 Version 1.0 3.4.2 System Overview From Main Menu, press ‘A’ to open menu System Overview. In this menu, it shows the current system information such as: System Name, Model, Firmware Version, CPU, RAM, Flash size, DSL chipset and Current Time. 3.4.3 System Operation Mode You can set System Operation Mode: BRIDGE or ROUTER from two different menus:- a.

  • Page 16: Bridge Mode

    G.SHDSL Router - AH507 Version 1.0 NOTE: You must press ‘Enter’ to update system configuration after selecting the operation mode. 3.4.4 Bridge Mode In Bridge mode, AH507 provides frame forward services between two or more LANs. It forwards frames based on the MAC (Medium Access Control) addresses which is hardware-level of NICs (Network Interface Card) The operation mode of the system must set to BRIDGE Mode.
  • Page 17 G.SHDSL Router - AH507 Version 1.0 3.4.4.1 Quick Setup: From Main Menu, press ‘B’ to open menu ‘Quick Setup’ Using this setup, the device can be quickly configured and operated properly. The WAN configuration is for the first Virtual Circuit ( VC 1 ) in twelve VC set available in the device. The details of the items are described in the following table: Item Field Name...
  • Page 18 G.SHDSL Router - AH507 Version 1.0 3.4.4.2 Basic Configuration: From Main Menu, - Press ‘C’ to open menu ‘Basic Configuration’. In menu Basic Configuration, the system can be configured in submenus: System Setup and WAN setup.
  • Page 19 G.SHDSL Router - AH507 Version 1.0 System Setup From Main Menu, - Press ‘C’ to open menu ‘Basic Configuration’. - Press ‘A’ to open menu ‘System Setup’ In menu System Setup, it contains the system related configuration such as: operation mode, service type, physical standard mode, Data Rate mode and so on.
  • Page 20 G.SHDSL Router - AH507 Version 1.0 WAN setup From Main Menu, - Press ‘C’ to open menu ‘Basic Configuration’. - Press ‘B’ to open menu ‘WAN Setup’ In menu WAN Setup, it shows the list of Virtual Circuits (VCs) and their statuses. If a VC is already configured then it displays its name as a identification, otherwise it displays a underscore line.
  • Page 21 G.SHDSL Router - AH507 Version 1.0 1) To setup VC configuration, Press any key ‘A’ to ‘L’ for an appropriate VC, i.e ‘A’ for VC 1, ‘B’ for VC 2...
  • Page 22 G.SHDSL Router - AH507 Version 1.0 2) To Delete VC configuration, - Press ‘Space Bar’, then follow the instructions in the bottom line. The details of the items are described in the following table: Item Field Name Description Value ISP Name ISP Name Max.
  • Page 23 G.SHDSL Router - AH507 Version 1.0 3.4.4.3 Advanced Configuration: From Main Menu, Press ‘D’ to open menu ‘Advanced Configuration In submenu Bridging and SNMP under menu Advanced Configuration, it will help you to configure the system related information such as: Bridging IP address, Spanning Tree, Priority, SNMP...
  • Page 24 G.SHDSL Router - AH507 Version 1.0 Bridging From Main Menu, Press ‘D’ to open menu ‘Advanced Configuration Press ‘A’ to open menu ‘Bridging’ The details of the items are described in the following table: Item Field Name Description Value Bridge IP Address Bridge IP Address i.e: ’192.168.0.2’...
  • Page 25 G.SHDSL Router - AH507 Version 1.0 SNMP From Main Menu, Press ‘D’ to open menu ‘Advanced Configuration Press ‘B’ to open menu ‘SNMP The details of the items are described in the following table: Item Field Name Description Value Disable or Enable the SNMP management Disable/Enable SNMP feature.
  • Page 26 G.SHDSL Router - AH507 Version 1.0 for.

  • Page 27: Router Mode

    G.SHDSL Router - AH507 Version 1.0 3.4.5 Router Mode The operation mode of the system must set to ROUTER Mode. To change the mode, please see the section 3.4.3. The following sections will help you to do configuration the device in Router mode. The application of the G.SHDSL Modem in Router Mode are illustrated in the following figures DSLAM / ISP...
  • Page 28 G.SHDSL Router - AH507 Version 1.0 3.4.5.1 Quick Setup: From Main Menu, Press ‘B’ to open menu ‘Quick Setup’. I Note: The WAN configuration is for the first Virtual Circuit (VC 1) in twelve VC set available in the device...
  • Page 29 G.SHDSL Router - AH507 Version 1.0 The details of the items are described in the following table: Item Field Name Description Value System operation mode. Press ‘Space BRIDGE / ROUTER Operation Mode Bar’ to select the setting. Default: BRIDGE System service type. System can be RT / COT Service Type operated as RT or COT type.
  • Page 30 G.SHDSL Router - AH507 Version 1.0 3.4.5.2 Basic Configuration: From Main Menu, Press ‘C’ to open menu ‘Basic Configuration In menu Basic Configuration, the system can be configured in individual submenu: System Setup, LAN Setup and WAN setup.
  • Page 31 G.SHDSL Router - AH507 Version 1.0 System Setup: From Main Menu, Press ‘C’ to open menu ‘Basic Configuration Press ‘A’ to open menu ‘System Setup In menu System Setup, it contains the system related configuration such as: operation mode, service type, physical standard mode, Data Rate mode. The details of the items are described in the following table: Item Field Name...
  • Page 32 G.SHDSL Router - AH507 Version 1.0 Date rate range. In Adaptive mode, the data rate can be ADAPTIVE: Range changed in the range 192~2304 kbps. 192~2304 In Fixed mode, it is set in the range 64~2304 FIXED: 64 - 2304 kbps.
  • Page 33 G.SHDSL Router - AH507 Version 1.0 LAN Setup From Main Menu, Press ‘C’ to open menu ‘Basic Configuration Press ‘B’ to open menu ‘LAN Setup’ ’...
  • Page 34 G.SHDSL Router - AH507 Version 1.0 The details of the items are described in the following table: Item Field Name Description Value Default: LAN IP Address LAN IP address of router ‘192.168.0.1’ LAN IP Subnet Default: LAN IP subnet mask of router Mask ‘255.255.255.0’...
  • Page 35 G.SHDSL Router - AH507 Version 1.0 WAN setup From Main Menu, - Press ‘C’ to open menu ‘Basic Configuration’. - Press ‘C’ to open menu ‘WAN Setup’ To setup VC configuration, - Press an key ‘A’ to ‘L’ for an appropriate VC, i.e ‘A’ for VC 1, ‘B’ for VC 2... To Delete VC configuration, - Press ‘Space Bar’, then follow the instruction in the bottom line.
  • Page 36 G.SHDSL Router - AH507 Version 1.0 VC setup: From Main Menu, Press ‘C’ to open menu ‘Basic Configuration Press ‘C’ to open menu ‘WAN Setup’ Press ‘A’ to ‘L’ to open the menu ‘VC Setup’ for the appropriate VC set.
  • Page 37 G.SHDSL Router - AH507 Version 1.0 The details of item are described in the following table: Item Field Name Description Value Max. 18 ISP Name ISP Name characters Virtual Path Identifier, given by ISP 0 – 16 Virtual Channel Identifier, given by ISP 33 - 4096 RFC2684 / IPoA / The encapsulation type is given by ISP.
  • Page 38 G.SHDSL Router - AH507 Version 1.0 Serial Port Setup The details of item are described in the following table: Item Field Name Description Value Physical port: Display the V.35 physical serial port. Clock source: Specify the clock source of this interface. V.35;...
  • Page 39 G.SHDSL Router - AH507 Version 1.0 3.4.5.3 Advanced Configuration: From Main Menu, Press ‘D’ to open menu ‘Advanced Configuration’ In menu Advance Configuration, the system can be configured in the submenu Routing, SNMP, Forwarding, DMZ, VPN, Access List & IP Filtering, and WAN- DHCP Relay...
  • Page 40 G.SHDSL Router - AH507 Version 1.0 Routing From Main Menu, Press ‘D’ to open menu ‘Advanced Configuration’. Press ‘A’ to open menu ‘Routing’ The details of the items are described in the following table: Item Field Name Description Value With Dynamic Routing, you can enable AH507 to Disable / automatically adjust to physical changes in the Enable...
  • Page 41 G.SHDSL Router - AH507 Version 1.0 IP Subnet Specify the Subnet Mask for the network ‘255.255.255. Mask configured in the static routing table. 0’ i.e ’192.168.0. Gateway Specify the IP address of Gateway. 1’...
  • Page 42 G.SHDSL Router - AH507 Version 1.0 SNMP From Main Menu, Press ‘D’ to open menu ‘Advanced Configuration’. Press ‘B’ to select ‘SNMP’ menu The details of the items are described in the following table: Item Field Name Description Value Disable or Enable the SNMP management Disable/Enable SNMP feature..
  • Page 43 G.SHDSL Router - AH507 Version 1.0 Port Forwarding Port Forwarding is usually set up for related services, such as web servers, FTP servers, E-mail servers etc reside at the private network. Most of the case, you need a public IP address for each server and this public IP address or domain name is accessed by all users.
  • Page 44 G.SHDSL Router - AH507 Version 1.0 Field Name Description Map WEB server on LAN for external Internet services. Map FTP server on LAN for external Internet services. TELNET Map TELNET server on LAN for external Internet services. Enter the description of the specific network service. Application VCIndex Specify the associated VC number.
  • Page 45 G.SHDSL Router - AH507 Version 1.0 As mentioned above, Port Forwarding can forward incoming TCP/UDP or other traffic on particular public ports to a specific private IP address/port of host resides in the private network. DMZ Host allows a defined internal user to be totally exposed to the Internet, which usually facilitates special applications such as Netmeeting or Internet Games that are incompatible with NAT.
  • Page 46 G.SHDSL Router - AH507 Version 1.0 From Main Menu, Press ‘D’ to open menu ‘Advanced Configuration’. Press ‘E’ to open the ‘VPN’ menu. The details of the items are described in the following table: Item Field Name Description Value IPSec pass Enable or disable the pass through of IPSec Disable/Enable through...
  • Page 47 G.SHDSL Router - AH507 Version 1.0 Access List & IP Filtering From Main Menu, Press ‘D’ to open menu ‘Advanced Configuration’. Press ‘F’ to open the ‘Access Control List’ menu.
  • Page 48 G.SHDSL Router - AH507 Version 1.0 - Press ‘A’ to open the ‘Standard Access Control List’ menu. Item Field Name Description Value Select index Specify a standard ACL number from 1 to 99 None Show ACL Show all current Access Control List. None...
  • Page 49 G.SHDSL Router - AH507 Version 1.0 - Press ‘B’ to open the ‘Extended Access Control List- IP Filtering’ menu. Item Field Name Description Value Select index Specify a standard ACL number from 101 to 199 None Show ACL Show all current Access Control List. None...
  • Page 50 G.SHDSL Router - AH507 Version 1.0 Denial of Service Denial of Service protection automatically detects and thwarts Denial of Service (DoS) attacks such as SYN Flood, and IP Spoofing. Illegal TCP flags Press ‘C’ to open the ‘Denial of Service Protection’ menu. Item Field Name Description...
  • Page 51 G.SHDSL Router - AH507 Version 1.0 WAN-DHCP Relay The router by default acts a DHCP server for your network so it automatically dispatch related IP settings to any local user configured as a DHCP client. It is highly recommended that you leave the router enabled as a DHCP server if you do not have a DHCP server for your network.
  • Page 52 G.SHDSL Router - AH507 Version 1.0 Frame Relay Item Field Name Description Value None, ANSI, CCITT, Specify the Local Management Interface. ANSI/DCE, CCITT/DCE DLCI Specify the Data Link Connection Identifier. Service Specify the type of the Services. None, FR-ATM Specify the WAN channel number VC index IP address Specify the IP address.

  • Page 53: System Maintenance

    G.SHDSL Router - AH507 Version 1.0 3.5 System Maintenance From Main Menu, Press ‘E’ to open the ‘System Maintenance’ menu...

  • Page 54: Load Factory Default

    G.SHDSL Router - AH507 Version 1.0 3.5.1 Load Factory Default From Main Menu, Press ‘E’ to open the ‘System Maintenance’ menu Press ‘A’ to open the ‘Load Factory Default’ menu If you type “Y” to re-load factory default, the device will reboot by itself.

  • Page 55: General Maintenance

    G.SHDSL Router - AH507 Version 1.0 3.5.2 General Maintenance From Main Menu, Press ‘E’ to open the ‘System Maintenance’ menu Press ‘B’ to open the ‘General Maintenance’ menu The details of the items are described in the following table: Item Field Name Description Value...

  • Page 56: Ping Test

    G.SHDSL Router - AH507 Version 1.0 3.5.3 Ping Test From Main Menu, Press ‘E’ to open the ‘System Maintenance’ menu Press ‘C’ to open the ‘Ping Test’ menu Note: If the test is successful then it will display a message: ‘ <Host IP> is alive! ’. Otherwise it will display a message “Network is unreachable”...

  • Page 57: Display Configuration

    G.SHDSL Router - AH507 Version 1.0 3.5.4 Display Configuration From Main Menu, Press ‘E’ to open the ‘System Maintenance’ menu Press ‘D’ to open the ‘Display Configuration’ menu Press “m” or “M” to see more information...

  • Page 58: Time Settings

    G.SHDSL Router - AH507 Version 1.0 3.5.5 Time Settings Item Field Name Description Value Time Server IP Specify Time Server IP None Time Zone Specify Time Zone None Disable/Enable Auto Synchronisation Disable/Enable Auto Synchroniization Default: Disable...

  • Page 59: Performance And Statistic

    G.SHDSL Router - AH507 Version 1.0 3.6 Performance and Statistic From Main Menu, Press ‘F’ to open menu ‘Performance & Statistic In menu ‘Performance & Statistic’, you can test the performance of the DSL line and the ATM interfaces which are already setup and activated.

  • Page 60: Dsl

    G.SHDSL Router - AH507 Version 1.0 3.6.1 DSL From Main Menu, Press ‘F’ to open the ‘Performance & Statistic’ menu Press ‘A’ to open the ‘DSL Performance & Statistic’ menu. And you can see the information of Line Code, Standard, Service mode, Attenuation, and Line Status.

  • Page 61: Atm

    G.SHDSL Router - AH507 Version 1.0 3.6.2 ATM From Main Menu, Press ‘F’ to open the ‘Performance & Statistic’ menu Press ‘B’ to open the ‘ATM Performance & Statistic’ menu...

  • Page 62: Configuring With Web

    G.SHDSL Router - AH507 Version 1.0 Configuring with web 4.1 Login When connected, the AH507 has has a login screen as shown below. To access the Web Utility, Configure your PC to the same network segment as the AH507. For example, if the IP of 507GF is configured as 192.168.2.143, you could set the PC to IP address 192.168.2.10 with a subnet mask of 255.255.255.0.

  • Page 63: Setup

    G.SHDSL Router - AH507 Version 1.0 4.3 Setup 4.3.1 System Information Menu “ System Information “ allows you to view and verify the unit’s identity information as shown below. In this menu, it shows the current system information such as: System Name, Model, Firmware Version, CPU, RAM, Flash size and DSL chipset.

  • Page 64: System Operation Mode

    G.SHDSL Router - AH507 Version 1.0 4.3.2 System Operation Mode You can set System Operation Mode: BRIDGE or ROUTER from two different menus:- From menu “Quick Setup”, perform the following steps. 1. Click the radio button Router or Bridge to select Operation Mode 2.

  • Page 65: Bridge Mode

    G.SHDSL Router - AH507 Version 1.0 1. From menu “System” Step 1: - Click the option button Router or Bridge to select Operation Mode Step 2: - Click Apply button to update the system operation mode 4.3.3 Bridge Mode In Bridge mode, AH507 provides frame forward services between two or more LANs. It forwards frames based on the MAC (Medium Access Control) addresses which is hardware-level of NICs (Network Interface Card) The operation mode of the system must set to BRIDGE Mode.
  • Page 66 G.SHDSL Router - AH507 Version 1.0 4.3.3.1 Quick Set-up Using this setup, the device can be quickly configured and operated properly. Note: The WAN configuration is for the first Virtual Circuit ( VC 1 ) in twelve VC set available in the device. The details of the items are described in the following table: Item Field Name...
  • Page 67 G.SHDSL Router - AH507 Version 1.0 BRIDGE IP Address The device IP address. i.e ‘192.168.0.1’ 4.3.3.2 Basic Configuration In menu Basic Configuration, the system can be configured in individual submenu: System Setup, and WAN setup. System In menu “System”, it contains the system related configuration such as: operation mode, service type, physical standard mode, Data Rate mode, and so on.
  • Page 68 G.SHDSL Router - AH507 Version 1.0 The details of the items are described in the following table: Item Field Name Description Value System Operation Mode System operation mode. BRIDGE / ROUTER System service type. System can be RT / COT Service Type operated as RT or COT type.
  • Page 69 G.SHDSL Router - AH507 Version 1.0 To setup VC configuration, Step 1: Click submenu channel 1 to channel 12 for an appropriate VC, i.e ‘channel1’ for VC 1, ‘channel2’ for VC 2.. To Delete VC configuration, Step 1: Click submenu channel 1 to channel 12 for an appropriate VC Click button “Delete VC”...
  • Page 70 G.SHDSL Router - AH507 Version 1.0 The details of the items are described in the following table: Item Field Name Description Value ISP Name ISP Name Max. 18 characters Virtual Path Identifier, given by ISP 0 - 16 Virtual Channel Identifier, given by ISP 33 - 4096 RFC2684 / IPoA / The encapsulation type is given by ISP.
  • Page 71 G.SHDSL Router - AH507 Version 1.0 4.3.3.3 Advanced Configuration In menu “Advance Configuration”, the system can be configured in the submenu Bridge and SNMP, Bridge The details of the items are described in the following table: Item Field Name Description Value IP Address Set Bridge IP Address...
  • Page 72 G.SHDSL Router - AH507 Version 1.0 SNMP To configure the SNMP, go through the following steps. Click the button to Enable or Disable SNMP management capabilities. Community Read-Only Community: Specify the community name of external SNMP Managers allowed with access level of Read to the unit’s MIB.

  • Page 73: Router Mode

    G.SHDSL Router - AH507 Version 1.0 4.3.4 Router Mode The operation mode of the system must set to ROUTER Mode. To change the mode with WEB, please see the section 4.3.2. The following sections will help you to do configuration the device in Router mode. Regarding to the application of the G.SHDSL Modem in Router Mode, please see the section 3.4.5.
  • Page 74 G.SHDSL Router - AH507 Version 1.0 The details of the items are described in the following table: Item Field Name Description Value BRIDGE / ROUTER Operation Mode System operation mode. Default: BRIDGE System service type. System can be RT / COT System Service Type operated as RT or COT type.
  • Page 75 G.SHDSL Router - AH507 Version 1.0 4.3.4.2 Basic Configuration In menu Basic Configuration, the system can be configured in individual submenu: System Setup, LAN Setup and WAN setup. System In menu “System”, it contains the system related configuration such as: operation mode, service type, physical standard mode, Data Rate mode.
  • Page 76 G.SHDSL Router - AH507 Version 1.0 Date rate range. In Adaptive mode, the data rate can ADAPTIVE: be changed in the range 192~2304 Range 192~2304 kbps. FIXED: 64 - 2304 In Fixed mode, it is set in the range 64~2304 kbps.
  • Page 77 G.SHDSL Router - AH507 Version 1.0 The details of the items are described in the following table:...
  • Page 78 G.SHDSL Router - AH507 Version 1.0 The details of the items are described in the following table: Item Field Name Description Value Default: IP Address LAN IP address of router ‘192.168.0.1’ IP Subnet Default: TCP/IP LAN IP subnet mask of router Mask ‘255.255.255.0’...
  • Page 79 G.SHDSL Router - AH507 Version 1.0 Serial Port To configure the V.35 Serial Port, go through the following steps. Step 1: From the Clock Source drop-down list, select V.35 or Internal. From the Tx Clock drop-down list, select Rising-Edge or Trailing-Edge. Step 2: Step 3: From the Rx Clock drop-down list, select Rising-Edge or Trailing-Edge.
  • Page 80 G.SHDSL Router - AH507 Version 1.0 To setup VC configuration, Step 1: Click submenu channel 1 to channel 12 for an appropriate VC, i.e ‘channel1’ for VC 1, ‘channel2’ for VC 2.. To Delete VC configuration, Step 1: Click submenu channel 1 to channel 12 for an appropriate VC Click button “Delete VC”...
  • Page 81 G.SHDSL Router - AH507 Version 1.0...
  • Page 82 G.SHDSL Router - AH507 Version 1.0 The details of the items are described in the following table: Item Field Name Description Value ISP Name ISP Name Max. 18 characters Virtual Path Identifier, given by ISP 0 - 16 Virtual Channel Identifier, given by 33 - 4096 RFC2684 / IPoA / The encapsulation type is given by...
  • Page 83 G.SHDSL Router - AH507 Version 1.0 IP Sharing or NAT (Network Access Disable/Enable IP Sharing Translation). Select from the drop- Default: Disable down list. 4.3.4.3 Advanced Configuration In menu “Advance Configuration”, the system can be configured in the submenu Routing, SNMP, Virtual Server, DMZ, VPN, WAN-DHCP Relay and Access List Routing The details of the items are described in the following table:...
  • Page 84 G.SHDSL Router - AH507 Version 1.0 A static route is a pre-configured path that data must traverse to reach a specific host or network. IP Address i.e ’10.10.10.50’ Specify the Destination IP Address for entry in the Static static routing table. Routing Specify the Subnet Mask for the network IP Subnet Mask...
  • Page 85 G.SHDSL Router - AH507 Version 1.0 Trap To configure the Trap, go through the following steps. Select the version number, SNMPv1 or SNMPv2, from the pull-down menu. Specify the IP address of each SNMP Trap Manager in the correspondent Destination IP. Select the options, None, Add or Delete, from the pull-down menu.
  • Page 86 G.SHDSL Router - AH507 Version 1.0 Virtual Server Port Forwarding is usually set up for related services, such as web servers, FTP servers, E-mail servers etc reside at the private network. Most of the case, you need a public IP address for each server and this public IP address or domain name is accessed by all users.
  • Page 87 G.SHDSL Router - AH507 Version 1.0 Port Forwarding can forward incoming TCP/UDP or other traffic on particular public ports to a specific private IP address/port of host resides in the private network. DMZ Host allows a defined internal user to be totally exposed to the Internet, which usually facilitates special applications such as Netmeeting or Internet Games that are incompatible with NAT.
  • Page 88 G.SHDSL Router - AH507 Version 1.0 Click VPN from the Configuration menu item for showing the configuration screen. To configure, Click the button to Enable or Disable the tunnel pass through feature specific to IPSec, L2TP, or PPTP corresponding to each protocol. Click the Apply button to save the configuration.
  • Page 89 G.SHDSL Router - AH507 Version 1.0 WAN DHCP-Relay The router by default acts a DHCP server for your network so it automatically dispatch related IP settings to any local user configured as a DHCP client. It is highly recommended that you leave the router enabled as a DHCP server if you do not have a DHCP server for your network.
  • Page 90 G.SHDSL Router - AH507 Version 1.0...
  • Page 91 G.SHDSL Router - AH507 Version 1.0 Frame Relay Click Frame Relay from the Configuration menu item for showing the configuration screen. To configure, From the LMI type drop-down list, select NONE, ANSI, CCITT, ANSI/DCE or CCITT/DCE. Enter the DLCI. From the Service drop-down list, select NONE or FR-ATM. Specify the WAN channel number.
  • Page 92 G.SHDSL Router - AH507 Version 1.0 Access List Standard Access Control List Click Access List from the Configuration menu item and then click Standard for showing the configuration screen. To configure, Specify the Access List Index. From the Active drop-down list, select NO or YES.. From the Action drop-down list, select Deny or Permit.
  • Page 93 G.SHDSL Router - AH507 Version 1.0 Extended Access Control List – IP filtering Click Access List from the Configuration menu item and then click Extended for showing the configuration screen. To configure, Specify the Access List Index. From the Active drop-down list, select NO or YES. From the Action drop-down list, select Deny or Permit.
  • Page 94 G.SHDSL Router - AH507 Version 1.0 Specify the IP address. Specify the Wildcard Mask. From the Port Operation drop-down list, select None, Less than, Greater Than, Equal, Not Equal. Click to radio button to enable the TCP protocol. Click the Apply button to save the configuration...
  • Page 95 G.SHDSL Router - AH507 Version 1.0 DOS Protection Denial of Service protection automatically detects and thwarts Denial of Service (DoS) attacks such as SYN Flood, and IP Spoofing. Illegal TCP flags Click DoS Protection from the Configuration menu item for showing the configuration screen.

  • Page 96: Maintenance

    G.SHDSL Router - AH507 Version 1.0 4.4 Maintenance 4.4.1 General Maintenance From menu item “Admin”, you can get the “General Maintenance” menu. To configure Password, Check the button “Yes “ to confirm the change or “ No “ to nullify the action. Enter the Old Password used.

  • Page 97: Time Settings

    G.SHDSL Router - AH507 Version 1.0 4.4.2 Time Settings The details of the items see section 3.5.5...

  • Page 98: Factory Default

    G.SHDSL Router - AH507 Version 1.0 4.4.3 Factory Default From Factory Default Menu, you’ll get a dialog as following picture: If you click “OK” to re-load factory default, the device will reboot by itself.

  • Page 99: Save

    G.SHDSL Router - AH507 Version 1.0 4.4.4 Save If you click “OK” to save the new configuration, the device will reboot by itself. 4.5 Performance 4.5.1 DSL Performance & Statistic Display the DSL Performance and Statistics.

  • Page 100: Atm Performance & Statistic

    G.SHDSL Router - AH507 Version 1.0 4.5.2 ATM Performance & Statistic Displaying ATM Performance and Statistics.

  • Page 101: Upgrading Firmware

    G.SHDSL Router - AH507 Version 1.0 Upgrading Firmware There are 2 kinds of methods to update firmware: Through Serial port Through Ethernet port 5.1 Upgrade using Ethernet port Step 1:Install TFTP software, such as TFTP Client (Details see Appendix A). Step 2:Connect the RS-232 &...

  • Page 102: Upgrade Using Serial Port

    G.SHDSL Router - AH507 Version 1.0 Step 7: Click “Upload Now…” to upgrade firmware code in AH507 will be upgraded after several minutes, and automatically reboot device. 5.2 Upgrade using Serial port Step 1: Connect PC and AH507 with RS-232 cable. Step 2: Using Hyper Terminal of Windows to check AH507 status.
  • Page 103 G.SHDSL Router - AH507 Version 1.0 Step 4: Press “Enter” key immediately when you see this message “Hit any key to stop autoboot: “ then you can see the pr ompt “=>”. Enter “loadb 100000” and press “Enter” key you can get following screen Step 5: Select “Send File…”...
  • Page 104 G.SHDSL Router - AH507 Version 1.0...
  • Page 105 G.SHDSL Router - AH507 Version 1.0 Step 8: Click “Browse” for select file to send as the following screen: Step 9: Click “OPEN”, you can get the following screen:...
  • Page 106 G.SHDSL Router - AH507 Version 1.0 Step 10: Click “Send” you can get the following screen: Step 11: Code in AH507 will be uploaded. It will take about 18~20 minutes. The above screen will automatically disappear after Code was completely updated and you can get the following screen:...
  • Page 107 G.SHDSL Router - AH507 Version 1.0 Step 12: Enter “erase 2860000 2bfffff “ as the following screen: Step 13: It will take about few minutes to erase flash memory and the screen will display “done” message as the following:...
  • Page 108 G.SHDSL Router - AH507 Version 1.0 Step 14: Enter “cp.b 100000 2860000 $(filesize)” as the following screen: Step 15: It will take about few minutes to copy flash memory and the screen will display “done” message as the following:...
  • Page 109 G.SHDSL Router - AH507 Version 1.0 Step 16: Enter “reset “ as the following screen: Step 17: The system will automatically reboot then you can see the new version that you had updated it before as the following screen:...

  • Page 110: Appendix

    G.SHDSL Router - AH507 Version 1.0 Appendix Appendix A: Install TFTP software Step 1:Install the software of TFTP, double click the icon of tptpd_ftp.exe as following: Step 2:Then the PC will show installing icon as following:...
  • Page 111 G.SHDSL Router - AH507 Version 1.0 Step 3:Click “Next”, the PC will show following screen Step 4: Select “I agree to the terms of this license agreement.” and click “Next” to get following screen:...
  • Page 112 G.SHDSL Router - AH507 Version 1.0 Step 5: Click “Next” and to get following screen: Step 6: Click “Next” and to get following screen:...
  • Page 113 G.SHDSL Router - AH507 Version 1.0 Step 7: Click “Install” and to get following screen: Step 8: Then click “Finish”, The TFTP software has been installed completely.

Table of Contents