Page 1
LOT NUMBER: DATE OF PURCHASE: / / Cohen 65" TV Console Stock # COH65C ADULT ASSEMBLY REQUIRED If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the store where it was purchased. Please call our customer service number and have your instructions and parts list ready to provide the model name, part name or factory number: 866-942-5362 Pacific Standard Time: 8:30 a.m.
Page 2
M A X I M U M R E C O M M E N D E D W E I G H T L O A D S MANUFACTURER: Whalen Furniture Manufacturing CATALOG: Cohen 65" TV Console (COH65C) MADE IN CHINA FITS UP TO MOST 75”...
Page 3
Parts and Hardware List Please read completely through the instructions and verify that all listed parts and hardware are present before beginning assembly. A- TV Console (1) B- Adjustable Shelf (4) (Pre-attached) (1) Acrylic Stopper (1) Touch-up Pen (1) Tipping Restraint Hardware Kit (2) (Included in plastic bag) Tools required: Phillips screwdriver (not provided).
DRAWER INSTALLATION If you need to remove the drawers with ball bearing slides from the unit, please follow the steps below to prevent any damage to the slides or the drawers. 1. If you need to remove the drawer, please pull the drawer all the way out, then simultaneously push the plastic release lever of the ball bearing slide up on one side and down on the other side, and then pull the drawer completely out.
Page 5
Assembly Instructions 1. Unpack the unit and confirm that you have all the hardware and required parts. 2. With the help of an assistant, remove the TV Console (A) from the box, and place it near the final installation location. 3.
Page 6
Assembly Instructions 4. The vented rear panels are removable for easy access to audio and video component hook-up. Be sure to route the cables through the side cutout, instead of through the ventilation holes.
Page 7
Assembly Instructions Acrylic Stopper (1 used in this step) ① NOTE: You must install the Acrylic TV Stopper to prevent the TV from tipping when placing your flat panel television directly on the top panel. 5. Remove the paper backing from the Acrylic Stopper (1), then properly align the Acrylic Stopper into the cut-out on the acrylic stopper template on the front of the top panel.
Page 8
Assembly Instructions Tools required: Phillips screwdriver, Mallet, Power Drill, and 3/8” Drill Bit. 7. Ask for assistance to position the console at the desired location against a wall. If necessary, adjust the pre-attached Floor Levelers at the bottom of the console to level the unit. 8.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.