System/Device Information - Acura 2011 MDX Navigation System Owner's Manual

To perform a conversion:
1. Enter a numeric value to be converted
(for example, 1000).
2. Move the Interface Dial down to
select UNIT CONVERSION. The
screen changes to:
3. Rotate the Interface Dial knob to
select the type of unit you want to
convert (for example, Length) and
push in on the Interface Dial to
select. The screen for that conversion
type appears (see illustration in
step 4).
4. Select the base unit (e.g., mm) that
you wish to convert to some other
unit. All other units will change
automatically depending on the base
unit value. In the example below,
1000 mm converts to 100 cm,
1 m, etc.
NOTE:
• If you do not enter a value to be
converted, only "Temperature" units
are selectable.
• Conversions using negative values
may produce meaningless or
physically impossible values.
• To return the Calculator screen,
select CALC. by moving the
Interface Dial to the right.
2011 MDX
Information Features

System/Device Information

Say or select System/Device
Information while on the INFO screen
(Other), and the display will change as
indicated below.
You will need this information when
ordering an update DVD. See page
for more information.
Navigation System
133
91