Wahl 4295-117 Instructions Manual page 16

HOT & COLD MASSAGER
DO NOT connect either wire to the terminal in the plug
which is marked with the letter 'E' or has the Earth
symbol, or coloured GREEN or GREEN/YELLOW.
If a 13 amp (BS 1363) plug is used, a 3 amp fuse
must be fitted. If any other type of plug is used a 5
amp fuse must be fitted either in the plug or adaptor at
the distribution board. Replacement fuses should be
approved to BS 1362
Fuse cover must be refitted when changing the fuse. If
the fuse cover is lost the plug must not be used until a
replacement is obtained. Information for obtaining the
correct fuse is marked on the carrier itself and in the
bottom of the fuse cavity in the plug. These may be
obtained from Wahl (UK) Ltd.
16