Frequently Asked Questions - K-FEE Lattaero User Manual

Frequently asked questions

The milk frother won't start
Check that the frother is correctly positioned on the base. Check that the whisk is properly fixed inside
the jug. The base connector must be dry.
The froth is poor in quality or the milk is burnt
For the best foam, use cold, fresh whole or semi-skimmed milk straight from the refrigerator (4-6°C).
Milk that has been frozen, or enriched, flavoured or reconstituted powdered milk, are not suitable.
Never add other ingredients such as syrup, sugar, cocoa or chocolate powder to the jug while it is in
use. This may damage the coating.
Ensure that the milk frother and whisk are clean.
All four buttons are blinking rapidly
A. The unit may be too hot.
• Check that the whisk is correctly fitted.
• If necessary, remove the jug from the base and hold it under cold water.
B. The bottom connector is not correctly positioned on the base.
C. There is water on the base or on the bottom of the jug.
The milk boils over
The jug has been overfilled with milk.
• Always fill the jug only to one of the two maximum levels shown - depending on the current task.
• Carefully lift the jug from the base, empty it out and rinse out with warm water. Then unplug the base
from the power supply and clean, if necessary, with a soft damp cloth.
12