5. Power key / Switch back to Home screen 2. How to charge While it’s possible that your SW 660 ECG will already come with enough charge to be powered on right out of the box, we recommend to fully...
Page 3
1. Attach the supplied charing cable to the bottom of the clock. 2. Insert the USB charging connector into any USB port that permits charging. 3. Press the Power key to start the display if not already lit. Note! Maximum charging output for USB charger: 5 V / 1 A.
Page 4
3. Install the app to a smartphone or tablet Download and install the app swissFit ECG from Google Play or App Store. Compatible devices • Android version 4.4 and later • IOS version 8.2 and later • Bluetooth 4.0 and later compatible device...
4. Create account or login and set your personal profile Open the app SwissFit ECG and create an account or login if you already have an account. After connecting the bracelet, enter the user’s information, click the Mine, Personal device in the App bottom state bar, according to own situations to set the height, weight, gender, wearing manner in the dialog box (Tips: the right information can...
Page 6
5. Pair the SW 660 ECG to your smartphone 1. Start Bluetooth on your smartphone. 2. Open the app SwissFit ECG and click Connect a device click the name of the bracelet SW 660 ECG. 3. Follow the instructions in the app to pair your...
Page 7
6. Synchronise the device SW 660 ECG automatically synchronises the data after the first pairing. Steps, active calories, distance, date and time is included in the synchro- nisation. You can view the available data daily, weekly or monthly in the app.
Page 8
7. Bracelet functions Press the touch area on the SW 660 ECG to switch between the following modes: Note: The fitness watch is controlled by tapping the touch area (2). Time and date Shows time, date and last measured steps, heart rate value burned calories.
Page 9
Measure your heart rate in real time. Measuring takes around 30 to 40 seconds. Blood pressure Monitor your blood pressure in the app or on your SW 660 ECG. Measuring takes around 30 to 40 seconds. ECG+PPG Press and hold the touch area for 3 seconds to enter the measurement state and follow the prompts to touch the metal ring.
Page 10
Otherwise the ECG measurement will not work reliably. Important: The SW 660 ECG does not replace a doctor. Heart attacks can not be detected. If pain or pressure in the chest area is felt, immediately alert the rescue service.
Page 11
Max storage are 3 messages. NOTE: In order to receive SMS, call and app notifi- cations on your SW 660 ECG, the following require- ments must be met: 1. The apps have a share for push messages in the mobile device’s settings menu.
Page 12
Find phone Go to Find Phone and long press the SW 660 ECG touch area, your phone rings or vibrates, depending on selected sound profile for you to find it. Theme Press and hold the touch area to select the...
Page 13
8. Sleep monitor Wear your SW 660 ECG at all times, also at night, to analyze your sleep quality according to your nocturnal movements and to monitor your entire sleep schedule. The SW 660 ECG switches to sleep mode at 22:00. You can view the available data daily, weekly or monthly.
Page 14
9. Detect heart rate and blood pressure Open the app SwissFit ECG and click Health. If you are measuring the heart rate for the first time it needs to be calibrated. Click Measure Calibration to enter the calibration interface. Divide the blood pressure calibration into Exact Calibration and Blood Pressure Level Calibration.
Page 15
Note! Your SW 660 ECG is a screening device primarily for diagnostic checking and the monitored data is not intended for medical use, nor is it intended to diagnose, treat, cure or prevent any disease or condition. The optical heart rate / blood pressure monitor is a valuable tool that provides an approximate estimation of the user’s heart rate at any given...
Page 16
10. Call and message notifications Tap Settings, then tap Notifications. Select the notifications you want to see on the SW 660 ECG. 11. Reminders Select to set reminders for Take medicine, Meeting, Sedentary, Drinking reminder function, you can click this...
Page 17
You can choose interval time: 1 hour, 2 hours, 3 hours, and 4 hours, choose begin and end time you need, and save. You will get an automatic reminder from your SW 660 ECG. Drink remind: You can choose interval time: 1 hour, 2 hours, 3 hours, and 4 hours, choose begin and end time you need, and save.
Page 18
12. Wake up alarm The alarm can be set once or repeatedly, you may set up to 5 different alarm times.
Page 19
13. Operation instructions Tap Mine and then select Operation instructions that will show the App version, instructions and answer the most common questions about the app, including setting up and using other features. Select Feedback to send suggestions and feedback to help to improve the product.
Page 20
2. Touch the menu item Reset device. 3. Confirm the process by tapping CONFIRM / confirm. Your SW 660 ECG will be reset. Note: If the fitness bracelet is not removed from the app, the settings of the app are taken over again after a short time (time, etc.).
16. Safety instructions Areas with explosion risk Always turn off the unit when you are in an area where there is a risk of explosion. Follow all signs and instructions. There is a risk of explosion in places that include areas where you are normally requested to turn off your car engine. In these areas, sparks can cause explosion or fire which can lead to personal injury or even death.
Page 22
Care and maintenance Your unit is a technically advanced product and should be treated with the greatest care. Negligence may void the warranty. • Do not use or keep the unit in dusty, dirty environments. The unit’s moving parts and electronic components can be damaged. •...
Page 23
Declaration of Conformity We hereby declare that the radio equipment type swisstone SW 660 ECG is in compliance with Directives: 2014/53/EU and 2011/65/EC (RoHS). A copy of the Declaration of Conformity is available at www.swisstone.de.
Page 24
Technical Specifications Bluetooth version Bluetooth frequency band 2402-2480 MHz Bluetooth max output power 10 mW (dBm) Dimensions Diameter: 5 cm Height: 1,2 cm Display 240 x 240 pixels, 1,3“ TFT Waterproof IP67 Weight 40 g Battery 230 mAh Li-ion battery Working temperature -10 ~ 50 °C Changes and errors excepted.
Need help?
Do you have a question about the SW 660 ECG and is the answer not in the manual?
Questions and answers