Connecting The Water Sprayer; Emptying The Pool; Cleaning - Intex DINOLAND PLAY CENTRE User Manual

Cleaning

Connecting the water sprayer

In the middle of the sea snake
be connected to a garden hose.
1. Make sure that the air chamber for the sea snake is properly inflated.
2. Fix the sprayer connection
3. Screw the adapter
4. Attach a garden hose to the adapter, and firmly tighten the thread.
5. Turn the tap on, to use the water sprayer.

Emptying the pool

Drain the pool after each use as follows:
1. Remove all objects from the pool.
2. Open the drain 6
To speed up the draining of the water, carefully press against the side wall or gen-
tly tip the pool.
Cleaning
NOTICE!
Risk of damage!
Improper handling of the pool may result in damage.
− Do not use any aggressive cleaners, brushes with metal or
nylon bristles or sharp or metallic cleaning utensils such as
knives, hard scrapers and the like. They could damage the
surfaces.
1. Rinse the pool with clear water. Use a garden hose or a watering can for this.
2. Use a soft sponge and lukewarm water to wipe the pool down.
3. Wipe the pool off with a soft, dry cloth.
4. Let the pool dry completely.
14
1 there is an integrated water sprayer
7 in place.
onto the sprayer connection (see Fig. D).
9
and let the water out.
2 which can