SunPower SPR-2326A6 User Manual

SPR-2326A6 / SPR-2326P6 User's Menu
Please read this user's guide carefully before setup.

Accessories:

1. AC power cord 1 pc.
2. Mounting bracket: 60-475-063(1pc), 60-475-105(1pc)
3. Screws: 1 set.

Mounting Holes Dimension:

Mounting:

Screw off
1
Pull out each module
2.
Screw on mounting brackets with power case; both front and back side of power
3.
case should be fixed.
(1) Screw bracket on the front side of power case (bracket: 60-475-105):
Only need to select either one side that fit your system to mount.
(2) To screw bracket on the back side of power case (bracket: 60-475-063):
Only need to select one position that fit your system to mount.
Screw on mounting brackets with power case
4.
Insert each power module.
5

Connect each connectors:

1. To mother board:
MOLEX 5557-20R
+5VS
+5V
-5V
COM
COM
COM
PS-ON
COM
-12V
+3.3VS
3. To storage driver:
5.To ATX 12V
Buzz alarm (
7. Wire color: white / black)
Function: short to disable buzz alarm
9. TTL low signal (Wire color: blue / black)
Signal: normal low
11. Power ON indicator LED (Green)
When either module is working, this LED will
be lighted
13. External thermal detector
To be mounted inside system to detect system's temperature
14. AC inlet
White wire to "N"
Gr/Yl wire to "FG"
Black wire to "L"
Screw on
6.
2. To mother board:
+12V
+5V
+5V SB
P.G.
+3.3V
COM
+3.3V
+5V
COM
COM
COM
+5V
COM
COM
+3.3V
+3.3V
4.To storage driver:
MOLEX 8981-4P
+12V
COM
COM
+5V
MOLEX 8981-4P
+12V
COM
COM
+5V
6. PS-on (Wire color: Green / black)
Short to enable power on (Momentary)
8.TTL high signal (Wire color: yellow /
black)
Signal: normal high
10. Module fail indicator LED (Red)
When either module is fail, this LED will
be lighted
12. Over temperature indicator LED
(Orange)
When temperature inside system reach
40 ~ 50℃, this LED will be lighted
N
FG
L
MOLEX 8981-4P
+12V
COM
COM
+5V