Medpage Memrabel 2 User Manual

r'\ewttr,-oA*,1ez
The Active Daily Reminder Clock
CHOICE OF TIME DISPLAY FORMATS
CHOICE OF TIME SCREEN COLOUR
UNLIMITED NUMBER OF PROGRAMMABLE ALARMS
CREATE REMINDERS WITH PHOTOS, AUDIO OR VIDEO
PRE.INSTALLED READY.TO.USE REMINDER FILES
lN THE BOX This manual,
1
x
MemRabel 2 Screen,
1
x
A/C Power.
adaptor,
1
x
Remote Control,
1
x Stand Attachment.
First insert
the stand attachment into the stand socket and tighten. Next insert
the
A/C power supply jack plug into the socket marked DC. Plug the power
adaptor into a
convenient mains power socket. MemRabel 2 will perform a start-
up sequence and after a
few seconds will revert to the default time display
screen.
You can change it later
if
you wish.
MemRabel
2 must be connected to a mains power supply at
all
times. ln the
event of
a power failure or accidental removal of the power adaptor from the
mains,
when power is reconnected the correct time and alarm settings will
be
restored
automatically. During a power down, MemRabel 2 alarms are inactive.
MOUSE MODE
Locate
the remote control. Gently pull out
the plastic battery isolator tab to activate
the remote control. Note: The remote
control is solely for the purpose of setting
the time and alarm
time reminders. When
all settings are complete please store the
remote control
in
a safe place to prevent
tampering or accidental switching off of
the MemRabel2.
lf the remote is lost or damaged, the
MemRabel
2 can still be adjusted
and
set-up using the buttons on the reverse of
the device. The only setting you will
be
unable to change is the
alarm playback
volume.
DO NOT USE
MemRabel2
User
Manual REV212/L7 www.medpage-ltd.com
01536
264869
ENTER
VOLUME UP
,,:,
r)-l POWER BUTTON
(REVERSE OF
MEMRABEL)
MENU NAVIGATIOI
BUTTONS