Table of Contents
Advertisement
PLEASE RETAIN YOUR RECEIPT. WARRANTY CLAIMS
WILL NOT BE RECOGNIZED WITHOUT A DATED RECEIPT.
Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1- 844-230-9904, 8 a.m. – 8 p.m., EST, Monday - Friday, or visit
www.myshadesource.com for more information.
welcoming
•
11 FT LED CANTILEVER UMBRELLA
1
sophisticated
•
inspiring
English
ITEM# 804780/876120
MODEL# AG45RLD-LS-3/4
Advertisement
Table of Contents
Summary of Contents for SimplyShade AG45RLD-LS-3
- Page 1 • inspiring English ITEM# 804780/876120 11 FT LED CANTILEVER UMBRELLA MODEL# AG45RLD-LS-3/4 PLEASE RETAIN YOUR RECEIPT. WARRANTY CLAIMS WILL NOT BE RECOGNIZED WITHOUT A DATED RECEIPT. Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1- 844-230-9904, 8 a.m.
- Page 2 PACKAGE CONTENTS Thank you for purchasing the SimplyShade 11-ft LED Cantilever Umbrella. PART DESCRIPTION QUANTITY Umbrella Solar Panel Rotating Hub Metal Stand Plastic Base Interior Plastic Base Exterior AC Adapter Base Plug Pole Cap NOTE: The Solar Panel (B) contains two lithium batteries (2 x 2200mAh). Do not attempt to open the solar panel when in use.
- Page 3 HARDWARE CONTENTS (not shown to actual size) Large Wrench Small Wrench Bolt Washer Crank Handle Qty: 1 Qty: 1 Qty: 6 Qty: 6 Qty: 1 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product.
- Page 4 ASSEMBLY INSTRUCTIONS 1. Assemble the Metal Stand (D) by overlapping the metal bars together on the ground in a cross pattern as shown. 2. Line up the holes in the Rotating Hub (C) on top of the Metal Stand (D). Secure the Rotating Hub (C) to the Metal Stand (D) with 4pcs Bolts (CC) and 4pcs Washers (DD).
- Page 5 ASSEMBLY INSTRUCTIONS 4. Assemble the Plastic Base (E/E1) by interlocking the 4pcs together onto the Metal Stand (D). You may need to reposition the pedal on the Rotating Hub (C) in this step. To do this, press down on the pedal and rotate either direction to reach desired position.
- Page 6 ASSEMBLY INSTRUCTIONS 7. Line up the two holes in the bottom of the Umbrella (A) pole with the Rotating Hub (C) and slide the Umbrella (A) pole down over the Rotating Hub (C) . Using the Large Wrench (AA), secure the Umbrella (A) pole to the Rotating Hub (C) with 2pcs Bolts (CC) and 2pcs Washers (DD) .
- Page 7 OPERATING INSTRUCTIONS 10. To rotate the Umbrella (A) canopy horizontally, place foot on the foot pedal of the Rotating Hub (C) and hands on the umbrella pole. Depress the pedal and rotate the umbrella in either direction to reach desired position. Release foot pedal to lock into place. WARNING: Always close the umbrella and secure the canopy to the umbrella pole with Storage Tie when not in use and during high winds or rain.
- Page 8 CARE AND MAINTENANCE . Before using, clean the product completely with a soft, dry towel. . Wash with a mild solution of soap and water; rinse dry completely. Do not use strong detergent or abrasive cleaners. . Store the product in a cool, dry location away from sunlight. .
Need help?
Do you have a question about the AG45RLD-LS-3 and is the answer not in the manual?
Questions and answers
How do I replace the cover on my11 ft simply shade cantilever
To replace the cover on the SimplyShade AG45RLD-LS-3 11 ft cantilever umbrella:
1. Remove the old canopy by detaching it from the corner pockets on the umbrella ribs.
2. Align the new replacement canopy over the frame.
3. Insert each rib tip into the corresponding corner pocket of the new canopy.
4. Ensure the fabric is evenly spread and secure.
Use a canopy designed for this model, such as the RipLock 500 with corner pocket attachment.
This answer is automatically generated
How do I replace the 11_ft canopy on a cantilever Simply shade
To replace the 11 ft canopy on a SimplyShade AG45RLD-LS-3 cantilever:
1. Confirm compatibility: The replacement canopy must match the AG45RLDT2-LS-2 model. Compare frame features to ensure compatibility, as canopies are not universal or interchangeable.
2. Remove the old canopy: Detach it from the frame, including from the corner pockets.
3. Install the new canopy:
- Use the corner pockets on the new canopy to attach it securely to the umbrella frame.
- Ensure the canopy is fitted properly over the frame and aligned with the LED lighting system if present.
4. Reinstall any parts removed during disassembly, such as the Solar Panel or Crank Handle, following the manual instructions.
Note: Metal frame is not included with the canopy.
This answer is automatically generated
Model AG45RLDT2-LS-1/2 Problem- The rotating handle will not lock in the vertical position Canopy will move with the wind. purchased 7-11-2020. Do I need parts for repair? Do you sell the parts? Any information would be appreciated.
Is it possible to purchase all the parts for the model# AG45RLD-LS-3/4 except for the Bermuda sand weighted base? We'd like to keep the base, as it is only 3 years old, but replace everything else for this cantilever umbrella. If it is possible, what would be the cost to do so. Thanks