Table of Contents
Advertisement
Quick Links
M M
a a
n n
a a
g g
e e
d d
S S
M
a
n
a
g
e
d
S
U U
U
V V
7 7
0 0
V
7
i i
n n
g g
l l
e e
M M
a a
s s
t t
e e
i
n
g
l
e
M
a
s
t
e
' '
'
S S
E E
R R
S S
S
E
R
S
0 0
L L
0
0
L
r r
/ /
S S
l l
a a
v v
e e
L L
A A
r
/
S
l
a
v
e
L
A
M M
A A
N N
U U
A A
M
A
N
U
A
N N
E E
x x
t t
e e
n n
d d
e e
N
E
x
t
e
n
d
e
L L
L
r r
r
Advertisement
Table of Contents
Summary of Contents for ELITEL V700L
- Page 1 ’ ’ ’...
-
Page 2: Copyright
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Copyright Copyright © 2018 All rights reserved. Trademarks Other brand and product names are registered trademarks or trademarks of their respective holders. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect... -
Page 3: V700L Managed Single Master / Slave Lan Extender User's Manual Ver. B
Use ONLY the dedicated power supply for your device. Connect the power to the right supply voltage (110V AC used for North America and 230V AC used for Europe. V700L supports 12 VDC power input). Place connecting cables carefully so that no one will step on them or stumble over them. DO NOT allow anything to rest on the power cord and do NOT locate the product where anyone can work on the power cord. - Page 4 Internet access and advanced voice services including VoIP, over a standard copper telephone cable. V700L is seen by many operators as an ideal accompaniment to a FTTP rollout, where for instance fiber optic is supplied direct to an apartment block and from there copper cable is used to supply residents with high-speed VDSL2.
-
Page 5: Table Of Contents
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Table of Contents COPYRIGHT ..................................................1 1.1 C ..................................................7 HECK CHAPTER 2. INSTALLING THE MODEM ........................................7 2.1 H ............................................. 8 ARDWARE NSTALLATION 2.2 P ..........................................8... - Page 6 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 4.3.3 Update Software ............................................. 24 4.3.4 Account Management ........................................... 25 4.3.5 Log Level ................................................26 4.3.6 Service Control ............................................... 27 4.3.7 CWNP (TR-069 Settings) ..........................................29 4.3.8 Internet Time ..............................................30 4.3.9 Restore Default ...............................................
- Page 7 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 4.8.1 Telnet Service Setup(for Security) ......................................50 4.8.2 SSH Service(Telnet Encryption) ......................................... 51 4.8.3 Printer Sharing ..............................................52 4.8.4 Multimedia Sharing ............................................53 4.8.5 UPnP .................................................. 54 4.8.6 Multicast IGMP ..............................................55 4.8.7 Multicast MLD (IPv6) ............................................
-
Page 8: Check List
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Chapter 1. Unpacking Information 1.1 Check List Thank you for choosing V700L Before installing the router, please verify the contents inside the package. Package Contents: 1 x QR code for user’s 1 x VDSL2 CO Modem... -
Page 9: Hardware Installation
2.1 Hardware Installation This chapter describes how to install the modem, and establish the network connections. The V700L may be installed on any level surface (e.g. a table or shelf). However, please take note of the following minimum site requirements before you begin. -
Page 10: Connecting The Rj-11 / Rj-45 Ports
FUNCTION Unused Unused Used Used Unused Unused 2.4 Connecting the RJ-11 / RJ-45 Ports The line port have 1 connector: RJ-11 . It is used to connect with V700L Master side over a single pair phone wire to V700L... -
Page 11: Point To Point Application
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Slave side (point to point application). (Figure 2.1) When inserting a RJ-11 plug, make sure the tab on the plug clicks into position to ensure that it is properly seated. - Page 12 2.5.1 Connect the V700L(Master) and the V700L(Slave) to the Line The objective for LAN extender is to pass high speed data over a twisted pair cable. In the setup, connect V700L(Master) to V700L (Slave) through phone wire(24~26 AWG) or line simulator or any other hardware representation of a cable network, with or without noise injection and crosstalk simulations.
-
Page 13: Chapter 3. Hardware Description
The Ethernet tester may send data downstream as well as upstream. It also receives the data in order to check the integrity of the data transmission. Different data rates can be tested under different line conditions Chapter 3. Hardware Description This section describes the important parts of the V700L. It features the front panel and rear panel. -
Page 14: Front Panel
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 V700L Outward 3.1 Front Panel The figure shows the front panel. (Figure 3.1) -
Page 15: Front Indicators
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 3.1 Front Panel(V700L) 3.2 Front Indicators The Modem has Seven LED indicators. The following Table shows the description. (Table 3-1) Table 3-1 LED Indicators Description and Operation... -
Page 16: Rear Panel
Note: It is normal for the connection between two V700L to take up to 3 minutes, due to V700L(Master) connect V700L(Slave) to establish a link mechanism in auto-speed, with detects and calculates Master and Slave both PBO and PSD level, noise levels and other arguments for getting a better connection. - Page 17 3-2) Table 3-2 Description of the modem rear connectors Type Connector Description The reset buttons allows users to reboot the LAN V700L or load the default settings. Reset Tact Switch Button Press and hold for 1-5 seconds: Reboot the V700L Press over 5 seconds: Load the default settings External switching Power Adapter: Input: AC 85~240Volts/50~60Hz.
-
Page 18: Chapter 4. Configure The V700L Via Web Management Menu
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 (E1-E4) USB2.0 Type A For connecting to the USB dongle. Before user installed power and device, please read and follow these essentials: Use separate paths to route wiring for power and devices. If power wiring and device wiring paths must cross, make sure the wires are perpendicular at the intersection point. -
Page 19: Basic Setup
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 The V700L provides a built-in HTML based management interface that allows configuration of the V700L via Internet Browser. Best viewed using Chrome or Firefox browsers. In order to use the web browser to configure the device, you may need to allow: ... -
Page 20: Login Webpage
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 4.1.1 Login Webpage The default username and password are “admin”. Figure 4.1.1 Login Webpage 4.1.2 Display status... -
Page 21: Select The Menu Level
MAC Address, and System Up Time), as shown in Figure 4.1.2. Figure 4.1.2 Device Info 4.2 Select the Menu Level There is an easy Setup for end users at the setup of V700L with System, Status, xDSL, LAN, Qos, Applications, USB, Home, Logout for more detail configurations... -
Page 22: System
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.2 Select the Menu Level 4.3 System Select “System”. The menu below will be used frequently. It includes the sub-menus of Configuration Backup、 、 Logs、 、 CWMP 、Internet Configuration Restore、... -
Page 23: Configuration Backup
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Time、Reboot、Restore Default. A screen is displayed as shown in Figure 4.3 Figure 4.3 System 4.3.1 Configuration Backup To backup the configuration setting value, click on the “Configuration Backup” link in the left navigation bar. A screen is displayed as shown in Figure 4.3.1. -
Page 24: Configuration Restore
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.3.1 Configuration Backup 4.3.2 Configuration Restore To restore your configuration setting value, click on the “Configuration Restore” link in the left navigation bar. A screen is displayed as shown in... -
Page 25: Update Software
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.3.2 Configuration Restore The screen contains the following detail: Click "Browse" to select a specific file name in preparation for router settings Click “Update Settings” to start updating. -
Page 26: Account Management
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.3.3 Update Software Note: The update process takes about 12 minutes to complete, and your Broadband Router will reboot. 4.3.4 Account Management To change or create passwords, click on the “Account Management” link in the left navigation bar. A screen is displayed as shown in Figure 4.3.4. -
Page 27: Log Level
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.3.4 Account Management-Password 4.3.5 Log Level Click on the “Log level” link in the left navigation bar, on the right page you will see how to enable Log or Log Server. -
Page 28: Service Control
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.3.5 Account Management – Log Level 4.3.6 Service Control Click on “Service Control” link in the left navigation bar, on the right page you will see how to enable ACL. - Page 29 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2...
-
Page 30: Cwnp (Tr-069 Settings)
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.3.6 Service Control – IP Address Configuration 4.3.7 CWNP (TR-069 Settings) -
Page 31: Internet Time
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Click on “CWMP” link in the left navigation bar to create TR-069 connection, and setup ACS URL/ ACS User Name/ACS Password and basic information. A screen is displayed as shown in Figure 4.3.7. -
Page 32: Restore Default
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 If SNTP server could not be connected to allow the device to synchronize the system clock to the global Internet. Please setup “Internet Time”. A screen is displayed as shown in Figure 4.3.8. -
Page 33: Status Setup
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Setting to the factory defaults, click on the “Restore Default” link in the left navigation bar, and press “Restore Default Settings”, the device will reboot in 10 seconds. A screen is displayed as shown in Figure 4.3.9. -
Page 34: Lan Network
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Select “Status”. It includes the sub-menus of Device Infomation、LAN Network、Ethernet、WAN Statistics、LAN Statistics、 ARP. A screen is displayed as shown in Figure 4.4 Figure 4.4 Device informations 4.4.1 LAN Network... -
Page 35: Ethernet
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Click on the “LAN Network” link in the left navigation bar, you will see the status of IPv4/IPv6 Address for this device. A screen is displayed as shown in Figure 4.4.1. -
Page 36: Wan(Line) Statistics
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Click on the “Ethernet” link in the left navigation bar, you will see the Ethernet Status, Speed, and Duplex of LAN1, LAN2, LAN3, LAN4 for this device. A screen is displayed as shown in Figure 4.4.2. -
Page 37: Lan Statistics
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 A screen is displayed as shown in Figure 4.4.3. Figure 4.4.3 Statistics—WAN(Line) 4.4.4 LAN Statistics Click on the “LAN Statistics” link in the left navigation bar, you will see the Received and Transmitted status for LAN1~4. A... -
Page 38: Arp
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 screen is displayed as shown in Figure 4.4.4. Figure 4.4.4 Statistics--LAN 4.4.5 ARP Click on the “ARP” link in the left navigation bar, you will see the records of Flags, HW Address, and Device status for... -
Page 39: Xdsl Setup
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 different IP addresses . A screen is displayed as shown in Figure 4.4.5. Figure 4.4.5 ARP setting 4.5 xDSL Setup... -
Page 40: Master/Slave Mode & Profile Config
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Select “xDSL”. It includes the sub-menus of Dsl Status、Dsl Config. Click on the “Dsl Status” link in the left navigation bar, you will see VDSL Information for this device. A screen is displayed as shown in Figure 4.5. -
Page 41: Vdsl Config Overview
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Click on the “Dsl Config” link in the left navigation bar, there are 9 VDSL modes selectable, the default setting is “3. Master Mode, Sy-Auto 1_8/2 (SNRM 6/6 )”. A screen is displayed as shown in Figure 4.5.1. -
Page 42: Lan Setup
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Config. Note Symmetric Auto, enable G. INP, enable re-transmition, Sy-Auto G.INP_17/2/41 (SNRM 8/8) SNRM=8 non symmetric Auto, enable G.INP, enable re-transmition, NSy-Auto G.INP_17/2/41 (SNRM 8/8) SNRM=8 Symmetric Auto, Max. Interleave=8, Min.Inp=2,... -
Page 43: Ipv4 Configuration
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 A screen is displayed as shown in Figure 4.6. Figure 4.6 LAN 4.6.1 IPv4 Configuration Click on the “IPv4 Configuration” link in the left navigation bar. Click “Apply” at any time during configuration to save the information that you have entered. -
Page 44: Ipv6 Configuration
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.6.1 IPv4 Configuration 4.6.2 IPv6 Configuration: Click on the “IPv6 Configuration” link in the left navigation bar. Click “Apply” at any time during configuration to save the information that you have entered. -
Page 45: Ipv6Static Route
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.6.2 IPv6 Configuration 4.6.3 IPv6Static Route Click on the “IPv6Static Route” link in the left navigation bar. Click “add” to a new page and setup Static Route. A screen is displayed as shown in Figure 4.6.3... - Page 46 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.6.3 IPv6Static Route...
-
Page 47: Ethernet Mode
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 4.6.4 Ethernet Mode Click on the “Ethernet Mode” link in the left navigation bar. Choose the speed (Auto, 10Mb/s, 100Mb/s) of LAN1~4, and click “Apply” to setup. -
Page 48: Qos Setup
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.6.4 LAN-Ethernet Mode Configuration 4.7 Qos Setup Select “Qos”. It includes the sub-menus of Qos Queue、Qos Classification. A screen is displayed as shown in Figure 4.7. -
Page 49: Qos Queue
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.7 Qos 4.7.1 Qos Queue Click on “Qos Queue” link in the left navigation bar, on the right page you will see how to enable Qos, and Upstream Queue Settings. -
Page 50: Applications
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.7.1 Qos Global Settings 4.8 Applications Select “Applications”. It includes the sub-menus of Telnet Service、SSH Service、Printer Share、Multimedia Share、UPnP、... -
Page 51: Telnet Service Setup(For Security)
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Multicast IGMP、Multicast MLD、SNMP. A screen is displayed as shown in Figure 4.8. Figure 4.8 Applications 4.8.1 Telnet Service Setup(for Security) Click on “Telnet Service” link in the left navigation bar, on the right page you will see how to enable Telnet Service. A screen is displayed as shown in Figure 4.8.1... -
Page 52: Ssh Service(Telnet Encryption)
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.8.1 Service-Telnet Service Setup 4.8.2 SSH Service(Telnet Encryption) Click on “SSH Service” link in the left navigation bar, on the right page you will see how to enable SSH Service. -
Page 53: Printer Sharing
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.8.2 SSH Service Setup 4.8.3 Printer Sharing Click on “Printer Share” link in the left navigation bar, on the right page you will see how to enable Printer Service, and type Queue Name. -
Page 54: Multimedia Sharing
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.8.3 Printer Service Setup 4.8.4 Multimedia Sharing Click on “Multimedia Share” link in the left navigation bar, on the right page you will see how to enable DMS, and select Share Folders. -
Page 55: Upnp
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.8.4 Multimedia Share Setup 4.8.5 UPnP Click on “UPnP” link in the left navigation bar, on the right page you will see how to enable UPnP, and add Blacklist. -
Page 56: Multicast Igmp
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.8.5 UPnP 4.8.6 Multicast IGMP Click on “Multicast IGMP” link in the left navigation bar. According to the setting, if you want to test IGMP function, you... -
Page 57: Multicast Mld (Ipv6)
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.8.6 IGMP Settings 4.8.7 Multicast MLD (IPv6) Click on “Multicast MLD” link in the left navigation bar. According to the setting, if you want to test MLD function, you only... -
Page 58: Snmp
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.8.7 MLD Settings 4.8.8 SNMP Click on “SNMP” link in the left navigation bar, on the right page you will see how to enable SNMP function. V700L supports SNMP V1/V2. - Page 59 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.8.8 SNMP Settings Download “MG-SOFT MIB Browser”. Below picture indicate how to use the software, and connect remote SNMP agent.
- Page 60 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Select OID:1.3.6.1.2.1.1.3 SysUp Time...
-
Page 61: Usb Setup
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 4.9 USB setup... -
Page 62: Storage Device Info
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Select “USB”. It includes the sub-menus of Storage Device Info、Samba Server、FTP Server、FTP Client、TFTP Server. A screen is displayed as shown in Figure 4.9. Figure 4.9 USB 4.9.1 Storage Device Info... -
Page 63: Samba Service
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Insert a U disk into the USB interface, then login 192.168.16.249, click on “Storage Device Info” link in the left navigation bar. Confirm the system has mounted the U disk. A screen is displayed as shown in Figure 4.9.1... -
Page 64: Ftp Server
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Click on “Samba Service” link in the left navigation bar, on the right page you will see how to enable Samba Service. A screen is displayed as shown in Figure 4.9.2. -
Page 65: Ftp Client
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Click on “FTP Server” link in the left navigation bar, on the right page you will see how to enable FTP Service function. A screen is displayed as shown in Figure 4.9.3. - Page 66 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Click on “FTP Client” link in the left navigation bar, on the right page you can input FTP Client Settings, and click “Download”. A screen is displayed as shown in...
- Page 67 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure 4.9.4 FTP Client Settings...
- Page 68 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Click “Refresh”, and make sure the status is complete. Figure 4.9.4 FTP Client Settings...
-
Page 69: Tftp Server
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 4.9.5 TFTP Server Click on “TFTP Server” link in the left navigation bar, on the right page you will see how to enable TFTP Server function. A screen is displayed as shown in Figure 4.9.5. -
Page 70: Appendix A: Cable Requirements
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Appendix A: Cable Requirements A.1 Ethernet Cable A CAT 3~7 UTP (unshielded twisted pair) cable is typically used to connect the Ethernet device to the Modem. A 10Base-T cable often consists of four pairs of wires, two of which are used for transmission. - Page 71 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Figure A-2 Pin Assignments and Wiring for an RJ-45 Straight-Through Cable Figure A-3 Pin Assignments and Wiring for an RJ-45 Crossover Cable...
- Page 72 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 A.2 Telephone wire Standard telephone wire of any gauge or type-flat, twisted or quad is used to connect the Modem to the telephone network. A telephone cable typically consists of three pairs of wires, one of which is used for transmission. The connector at the end of the telephone cable is called an RJ-11 connector and it consists of six pins.
-
Page 73: Appendix B: Product Specification
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Appendix B: Product Specification Key Features & Benefits Adopts ARM Cortex A9 dual-core processor Supports Master/Slave Mode selectable by Web config menu Supports G.998.4 G.INP ... - Page 74 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Supports bridge mode only Supports Dual Firmware Image Backup Supports SNMP v1/v2 On board POTS/ISDN splitter Supports TR-069 Note: 1. Features and specifications in this manual are subject to change without prior notice.
- Page 75 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Product Specification IEEE802.3/802.3u standards Standard: ITU-T G993.2/G998.4 standards Regulatory Compliance: RoHS Compliance 4 x RJ-45 10/100 Mbps Ethernet port 1 x RJ-11 / Terminal combo for line port...
- Page 76 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 0°C ~ 50°C (32°F ~ 122°F) Operating Temperature: Fanless, free air cooling Storage Temperature: -20°C ~ 70°C (-4°F ~158°F) Humidity: 10% to 90% (non-condensing) Dimensions: 184 x 146 x 40 mm ( 7.2" x 5.74" x 1.57”)
-
Page 77: Appendix C: Troubleshooting
Solution: 2.4 Check the modem on the attached device and cable connections for possible defects. 2.5 Make sure that the phone wire must be connecting V700L first, when powered on. 2.6 Replace the defective modem or cable if necessary. 2.7 Or try to change band profile as 17a for getting long reach... - Page 78 V700L Master/Slave setting failure or phone cable length is over the specification limit. 3.1 Please make sure that the phone wire must be connected between V700L(Master) side and V700L(Slave) side when both are power on. V700L Master side will do link speed function depending on phone wire length, therefore if V700L Master side can’t detect Slave Side over...
- Page 79 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 The protocol was standardized in the International Telecommunication Union telecommunications sector (ITU-T) as Recommendation G.993.2. It was announced as finalized on 27 May 2005,[1] and first published on 17 February 2006. Several corrections and amendments were published in 2007 through 2011.
- Page 80 –c server IP address –i 1 –t 50 –w 65535 for client side. I just bought a V700L to replace my Quest DSL modem for my home. I was told any VDSL2 modem would replace and give me higher communication speeds. It doesn’t get me internet when hooked up.
- Page 81 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 We need to set up a default gateway on a V700L pair which are in Bridge mode, as they want to 7. Question: manage the units from a different network.
- Page 82 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 9. Question: What is the maximum Ethernet frame MTU for these modems? V700L maximum Ethernet frame MTU is 1522 bytes. Answer:...
- Page 83 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 System Diagnostics Power and Cooling Problems If the POWER indicator does not turn on when the power cord is plugged in, you may have a problem with the power outlet, power cord, or internal power supply as explained in the previous section.
- Page 84 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Physical Configuration If problems occur after altering the network configuration, restore the original connections, and try to track the problem down by implementing the new changes, one step at a time. Ensure that cable distances and other physical aspects of the installation do not exceed recommendations.
-
Page 85: Appendix E: Compliance Information
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Appendix E: Compliance Information FCC Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a computing device, pursuant to Part 15 of FCC rules. - Page 86 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the proper functioning of your equipment. If they do, you will be notified in advance in order for you to make necessary modifications to maintain uninterrupted service.
- Page 87 V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 RoHS Mark Warning RoHS stands for Restriction of Hazardous Substances, and impacts the entire electronics industry and many electrical products as well. The original RoHS, also known as Directive 2002/95/EC, originated in the European Union in 2002 and restricts the use of six hazardous materials found in electrical and electronic products.
-
Page 88: Warranty
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Warranty The original product that the owner delivered in this package will be free from defects in material and workmanship for one year parts after purchase. There will be a minimal charge to replace consumable components, such as fuses, power transformers, and mechanical cooling devices. -
Page 89: Chinese Sj/T 11364-2014
V700L Managed Single Master / Slave LAN Extender USER’S MANUAL Ver. B.2 Chinese SJ/T 11364-2014 有 毒 有 害 物 质 或 元 素 部件名称 铅(Pb) 汞(Hg) 镉(Cd) 六价铬[Cr(VI)] 多溴联苯(PBB) 多溴二苯醚(PBDE) 结构壳体 ○ ○ ○ ○ ○ ○ 电路组 ○...
Need help?
Do you have a question about the V700L and is the answer not in the manual?
Questions and answers