Page 3
MI0003 issue 5 The Leglifter by Mangar International enables people to raise their legs onto the bed independently or with minimal assistance. Power is provided by the Mangar International Airflo compressor. PLEASE READ the separate Airflo compressor instructions before using your Leglifter. When properly maintained, the Leglifter will give many years of trouble free service.
Page 4
(A fig. 1) and pass the straps under the mattress. • Fit the hook of each strap onto the Leglifter flap (B fig.1) and position the Leglifter loosely alongside the bed, clear of any obstacles such as a bedside table.
Page 5
• Hook the two straps onto the flap of the Leglifter as indicated in (B fig.4) and pull on the strap at the adjuster buckle to draw the ‘Vee’ of the deflated Leglifter inwards over the bed frame and under the mattress by about 1 to 2 fingers width (C fig.5).
Page 6
(fig. 7). • Fully raise the Leglifter, allowing your legs to slide along the cushion and gently drop onto the bed (figs. 8 & 9). •...
Page 7
The cover can be thermal disinfected at 70°C for 3 minutes, followed by tumble drying. Storage Ensure that the Leglifter is thoroughly dry before storing. Store deflated. Insert the Vent Plug (fig. 10) in the air hose fitting to assist in releasing any trapped air.
Page 8
To find out how we can provide complete cover for your Mangar International product call our Customer Care Department on Freephone 0800 280 0485. Mangar International reserves the right to alter product specifications and/or any of the information contained within this document without notice. freedom through lightweight solutions...
Need help?
Do you have a question about the Leglifter and is the answer not in the manual?
Questions and answers